Intel RSTe NVMe RAID Driver 4.5.0.2125 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel RSTe NVMe RAID Driver 4.5.0.2125
Category	Motherboard
Manufacturer	Intel
File Size	24 KB
Supported OS	Windows 2008 ,Windows 7 ,Windows 7 64 bit ,Windows Server 2012 ,Windows 8.1 ,Windows 8.1 64 bit ,Windows 10 ,Windows 10 64 bit

Intel RSTe NVMe RAID Driver 4.5.0.2125 Description

The Intel RSTe 4.5.0.2125 NVMe release package contains the release version of the Windows drivers, and utilities to support Intel NVMe storage technology using Intel NVMe SSDs. Intel RSTe 4.5.0.2125 NVMe does not support booting from an NVMe RAID Volume.

Changes:

- Intel RSTe 4.5 NVMe PV release 4.5.0.2125 with Windows Server 2016 Support

The following configurations and test scenarios are not supported in this release. As such, any issues reported against these configurations will not be accepted:

- Booting from an NVMe RAID volume (Pass-Through only)
- Updating the Intel NVMe driver is not supported following the Windows driver update process through Device Manager. Please use the Intel NVMe Installation utility instead.
- Intel RSTe 4.5 supports up to 12 Intel NVMe Drives attached to the PCI express slots managed by the (supported) platform’s CPU(s).

This download is valid for the products listed below:

- Intel SSD DC P3700 Series (1.6TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (1.6TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (2.0TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (2.0TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (400GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (400GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (800GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3700 Series (800GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (2.0TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (2.0TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (1.2TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (1.2TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (1.6TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (1.6TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (2.0TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (2.0TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (400GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (400GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (800GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3600 Series (800GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (400GB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (400GB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (1.2TB, 1/2 Height PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3500 Series (1.2TB, 2.5in PCIe 3.0, 20nm, MLC)
- Intel SSD DC P3520 Series (1.2TB, 1/2 Height PCIe 3.0 x4, 3D1, MLC)
- Intel SSD DC P3520 Series (2.0TB, 2.5in PCIe 3.0 x4, 3D1, MLC)
- Intel SSD DC P3608 Series (1.6TB, 1/2 Height PCIe 3.0 x8, 20nm, MLC)
- Intel SSD DC P3520 Series (1.2TB, 2.5in PCIe 3.0 x4, 3D1, MLC)
- Intel SSD DC P3520 Series (2.0TB, 1/2 Height PCIe 3.0 x4, 3D1, MLC)
- Intel SSD DC P3608 Series (3.2TB, 1/2 Height PCIe 3.0 x8, 20nm, MLC)
- Intel SSD DC P3608 Series (4.0TB, 1/2 Height PCIe 3.0 x8, 20nm, MLC)
- Intel SSD DC P3520 Series (450GB, 2.5in PCIe 3.0 x4, 3D1, MLC)

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers