ASUS H81I-PLUS Intel Graphics Driver 10.18.10.3412 Download

Posted at November 24, 2024 by PCI-DB Team

ASUS H81I-PLUS Intel Graphics Driver 10.18.10.3412 Description

Specifications:

CPU:
- Intel Socket 1150 for 4th Generation Core i7/Core i5/Core i3/Pentium/Celeron Processors
- Supports Intel 22 nm CPU
- Supports Intel Turbo Boost Technology 2.0

Chipset:

- Intel H81

Memory:

- 2 x U-DIMM, Max. 16GB, DDR3 1600/1333/1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
- Supports Intel Extreme Memory Profile (XMP)

Graphic:

- Integrated Graphics Processor
- Supports HDMI with max. resolution 4096 x 2304 @ 24 Hz / 2560 x 1600 @ 60 Hz
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 1920 x 1200 @ 60 Hz
- Maximum shared memory of 1024 MB

Expansion Slots:

- 1 x PCIe 2.0 x16

Storage:

- Intel H81 chipset
- 2 x SATA 6Gb/s port(s), yellow
- 2 x SATA 3Gb/s port(s), dark brown
- Supports Intel Rapid Start Technology, Intel Smart Connect Technology

LAN:

- Realtek RTL8111G, 1 x Gigabit LAN Controller(s)

Audio:

- Realtek ALC887 8-Channel High Definition Audio CODEC

USB Ports:

- 4 x USB 3.0 port(s) (2 at back panel, 2 at mid-board)
- 8 x USB 2.0/1.1 port(s) (4 at back panel, 4 at mid-board)

Back I/O Ports:

- 1 x PS/2 keyboard/mouse combo port(s)
- 1 x DVI-D
- 1 x D-Sub
- 1 x HDMI
- 1 x LAN (RJ45) port(s)
- 2 x USB 3.0
- 4 x USB 2.0
- 3 x Audio jack(s)

Internal I/O Ports:

- 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s)
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 1 x TPM header
- 2 x SATA 6Gb/s connector(s)
- 2 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s) (1 x 4 -pin)
- 1 x Chassis Fan connector(s) (1 x 4 -pin)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel connector(s)
- 1 x Internal speaker connector(s)
- 1 x System panel(s)
- 1 x Clear CMOS jumper(s)

BIOS:

- 64 Mb Flash ROM, AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.7, ACPI 2.0a

Manageability:

- WOL by PME, PXE

Form Factor:

- Mini ITX Form Factor
- 6.7 inch x 6.7 inch ( 17 cm x 17 cm )

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers