ASRock C70M1 R2.0 ITE CIR Driver 2.09.1007 for Windows 8.1 Download

Posted at November 23, 2024 by PCI-DB Team

ASRock C70M1 R2.0 ITE CIR Driver 2.09.1007 for Windows 8.1 Description

Specifications:

Chipset:
- AMD A50M Chipset

Memory:

- 2 x DDR3 DIMM Slots
- Supports DDR3 1333/1066/800 non-ECC, un-buffered memory
- Max. capacity of system memory: 16GB

Graphics:

- Integrated AMD Radeon HD 7290 graphics
- DX11 class iGPU, Pixel Shader 5.0
- Max. shared memory 512MB
- Supports D-Sub with max. resolution up to 2560x1600 @ 60Hz

Audio:

- 5.1 CH HD Audio (Realtek ALC662 Audio Codec)
- Supports Surge Protection (ASRock Full Spike Protection)

LAN:

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s
- Realtek RTL8111E
- Supports Wake-On-LAN
- Supports Lightning/ESD Protection (ASRock Full Spike Protection)
- Supports LAN Cable Detection
- Supports Energy Efficient Ethernet 802.3az
- Supports PXE

Slots:

- 1 x PCI Express 2.0 x16 Slot (PCIE1 @ x4 mode)

Storage:

- 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug

Connector:

- 1 x CIR Header
- 1 x COM Port Header
- 1 x Chassis Intrusion Header
- 1 x CPU Fan Connector (3-pin)
- 2 x Chassis Fan Connectors (1 x 4-pin, 1 x 3-pin)
- 1 x 24 pin ATX Power Connector
- 1 x Front Panel Audio Connector
- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection))

Rear Panel I/O:

- 1 x PS/2 Keyboard/Mouse Port
- 1 x D-Sub Port
- 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))
- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
- HD Audio Jacks: Line in / Front Speaker / Microphone

Hardware Monitor:

- CPU/Chassis temperature sensing
- CPU/Chassis Fan Tachometer
- CPU Quiet Fan (Auto adjust chassis fan speed by CPU temperature)
- CPU/Chassis Fan multi-speed control
- CASE OPEN detection
- Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

Form Factor:

- Mini-ITX Form Factor
- High Density Glass Fabric PCB

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ITE Drivers