TRENDnet THA-101 v1.0R Switch Firmware 1.02 Download

Posted at December 3, 2024 by PCI-DB Team

TRENDnet THA-101 v1.0R Switch Firmware 1.02 Description

Specifications:

Smart Home App:
- Quick in-app THA-101 installation
- Power on/off the electrical outlet from any internet connection
- Create weekly on/off electrical outlet schedule
- View real time power consumption: Energy (KWh), current (A), voltage (V), power (W)
- Manage multiple THA-101 units from the app

Hardware Standards:

- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.11n (up to 300 Mbps)

Device Interfaces:

- Electrical outlet
- WPS button
- Power switch
- LED indicators
- Reset button

Special Features:

- Overcurrent protection
- Requires existing wireless network in order to function

Encryption:

- Wireless encryption: WEP, WPA/WPA2-PSK

Media Access Protocol:

- CSMA/CA with ACK

Antenna Gain:

- 2 x 2 dBi

Frequency:

- 2.412 - 2.484 GHz

Wireless Channels:

- FCC: 1-11, ETSI: 1-13

Modulation:

- 802.11b: CCK (11 Mbps & 5.5 Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps)
- 802.11g: OFDM with BPSK, QPSK and 16/64-QAM
- 802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM
- Wireless Output Power (EIRP)/Receiving Sensitivity
- 802.11b: 17 dBm (typical)/-84 dBm (typical) @ 11 Mbps
- 802.11g: 14 dBm (typical)/-73 dBm (typical) @ 54 Mbps
- 802.11n: 14 dBm (typical)/-70 dBm (typical) @ 300 Mbps

Power:

- 100 - 240 V AC, 50 /60 Hz
- Consumption: 6 Watts max.

Power Capacity:

- US: 1800 Watts / 15 Amps
- EU/UK: 3120 Watts / 13 Amps

Operating Temperature:

- 0 - 40 °C (32 – 104 °F)

Operating Humidity:

- Max. 95% non-condensing

Certifications:

- CE
- FCC

Dimensions:

- 93 x 58 x 37 mm (3.7 x 2.3 x 1.46 in.)

Weight:

- US: 138 g (4.9 oz.)
- EU: 156 g (5.5 oz.)
- UK: 160g (5.6 oz.)

About Switches:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related TRENDnet Drivers