Gigabyte GA-X58-USB3 (rev. 1.0) Intel SATA RAID Preinstall Driver 9.5.0.1037 Download
Posted at December 26, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | Gigabyte GA-X58-USB3 (rev. 1.0) Intel SATA RAID Preinstall Driver 9.5.0.1037 |
|---|
| Category | Other Drivers Tools |
|---|
| Manufacturer | INTEL |
|---|
| File Size | 351 KB |
|---|
| Supported OS | Windows XP ,Windows 2003 ,Windows XP 64 bit |
|---|
Gigabyte GA-X58-USB3 (rev. 1.0) Intel SATA RAID Preinstall Driver 9.5.0.1037 Description
CPU
1. Support for an Intel Core i7 series processor in the LGA1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s, 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
2. Dual/3 channel memory architecture
3. Support for DDR3 2200/1333/1066/800 MHz memory modules
4. Support for non-ECC memory modules
5. Support for Extreme Memory Profile (XMP) memory modules
Audio
1. Realtek ALC892 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for Dolby Home Theater
5. Support for S/PDIF In/Out
6. Support for CD In
LAN
1. 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
(The PCIEX16_1 and PCIEX16_2 slots conform to PCI Express 2.0 standard.)
2. 1 x PCI Express x16 slot, running at x4 (PCIEX4_1)
3. 3 x PCI Express x1 slots
4. 1 x PCI slot
Multi-Graphics Technology
1. Support for ATI CrossFireX/NVIDIA SLI technology
Technology (The PCIEX16_1 and PCIEX16_2 slots only.)
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
USB
Integrated in the South Bridge:
1. Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)
NEC chip:
1. Up to 2 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 6 x SATA 3Gb/s connectors
4. 1 x CPU fan header
5. 3 x system fan headers
6. 1 x power fan header
7. 1 x North Bridge fan header
8. 1 x front panel header
9. 1 x front panel audio header
10. 1 x CD In connector
11. 1 x S/PDIF In header
12. 1 x S/PDIF Out header
13. 3 x USB 2.0/1.1 headers
14. 1 x clearing CMOS jumper
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x coaxial S/PDIF Out connector
4. 6 x USB 2.0/1.1 ports
5. 2 x USB 3.0/2.0 ports
6. 1 x RJ-45 port
7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/System/North Bridge temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Support for @BIOS
2. Support for Q-Flash
3. Support for Xpress BIOS Rescue
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune
8. Support for Dynamic Energy Saver 2
9. Support for Smart 6
10. Support for Auto Green
11. Support for eXtreme Hard Drive (X.H.D)
12. Support for ON/OFF Charge
13. Support for Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related INTEL Drivers