Intel D101GGC BIOS 0302 Download

Posted at December 24, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel D101GGC BIOS 0302
Category	Bios
Manufacturer	Intel
File Size	439 KB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Intel D101GGC BIOS 0302 Description

Instructions to update the BIOS for Intel Desktop Boards with Award BIOS:

1. An MS-DOS startup diskette will be needed. If necessary, one may be created in Microsoft Windows* XP using the following steps:

a) Insert a blank floppy diskette into the floppy diskette drive. WARNING: Any data on this diskette WILL BE DESTROYED!
b) From the Windows XP "Start" menu, select "My Computer".
c) Right-click on the icon for the A: drive, and select "Format..." from the menu.
d) Click the box labeled "Create an MS-DOS startup disk" and then click the "Start" button. After the format process is complete, proceed with the instructions below.

2. Download and run the BIOS update file to extract the files needed to update the BIOS. The file will be named "GC11010N.86A.xxxx.EXE", where xxxx is the version of the BIOS.

3. After running the BIOS update file, copy the following files to the floppy diskette created in step 1:

￭ GC_xxxx.BIN (where xxxx denotes the version of the BIOS)
￭ AWDFLASH.EXE
￭ AUTOEXEC.BAT

NOTE: Overwrite the AUTOEXEC.BAT file on the floppy diskette if prompted.

4. Insert the diskette into the floppy drive of the system to be updated and turn it on. The BIOS Flash Utility will start automatically after boot.

5. After loading the BIOS update file, the BIOS Flash Utility will prompt you "Do You Want To Save BIOS (Y/N)?". Pressing "Y" will make a copy of the existing BIOS before updating, pressing "N" will skip this step.

NOTE: Making a copy of the BIOS will require free space on the floppy diskette approximately equal to the size of the BIOS update file (GC_xxxx.BIN).

6. A second prompt will display: "Press 'Y' to Program or 'N' to Exit". Pressing "N" will exit without updating the BIOS. Press "Y" to proceed with the update.

7. When the update is complete, remove the floppy diskette and press the "F1" key as prompted by the BIOS Flash Utility.

8. The system will reboot and the BIOS update process is complete

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers