ECS G43T-M (V1.0A) Intel VGA Driver 14.42.1.5248 for XP Download
Posted at October 5, 2025 by PCI-DB Team
Install Driver Automatically Device Name | ECS G43T-M (V1.0A) Intel VGA Driver 14.42.1.5248 for XP |
---|
Category | Graphics Board |
---|
Manufacturer | INTEL |
---|
File Size | 20.9 MB |
---|
Supported OS | Windows XP |
---|
ECS G43T-M (V1.0A) Intel VGA Driver 14.42.1.5248 for XP Description
CPU
- LGA775 socket for latest Intel Yorkfield/ Wolfdale/ Core 2 Quad/ Core 2 Duo/ Pentium Dual Core/ Celeron Dual Core/ Celeron 4xx processor
- FSB 1333/1066/800 MHz
CHIPSET
- Intel Eaglelake G43 & ICH10
- North Bridge: Intel Eaglelake G43
- South Bridge: Intel ICH10
GRAPHICS
- Integrated Intel Graphics Media Accelerator X4500 ( GMA X4500 )
- Integrated DirectX 10 graphics processor
- Max Dynamic Video Memory : 1759MB (Vista) / 1GB (WinXP)
MEMORY
- Dual-channel DDR2 memory architecture
- 4 x 240-pin DDR2 DIMM socket support up to 8 GB
- (Please insert two Single Bank memory modules to each channel when using one channel with two dimms.)
- For more information, please refer QVL memory list on ECS website
- Support DDR2 800/667 DDR2 SDRAM
EXPANSION SLOT
- 1 x PCI Express x16 slot
- 2 x PCI Express x1 slots
- 1 x PCI slot
STORAGE
- Support by Intel ICH10
- 6 x Serial ATAII 3.0Gb/s devices
- Support by JMB 361- 1 x IDE channel support 2 Ultra DMA133/100/66 devices
AUDIO
- Realtek ALC 888S supports 8-channel HD audio
LAN
- Gigabit LAN, Atheros AR8121-L1E GigaLAN controller
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 6 x USB ports
- 1 x RJ45 LAN connector
- 1 x Audio port
- 1 x VGA port
- 1 x HDMI Port
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- CPUFAN/SYSFAN connectors
- 1 x IDE connector
- 1 x Speaker header
- 1 x SPDIF out header
- 6 x Serial ATA 3Gb/s connectors
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x CD in header
- 3 x USB 2.0 headers support additional 6 USB ports
- 1 x COM1 header
- 1 x Clear CMOS header
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR/STD, Hardware monitor, PCI interrupt selection, ACPI & DMI, CPU FSB adjustment (increase of 1MHz)
- Supports STR(S3)& STD(S4)
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Memory voltage adjustable
- PECI Supports
FORM FACTOR
- Micro-ATX Size, 244mm*244mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related INTEL Drivers