QNAP TVS-882 TurboNAS QTS Firmware 4.2.2 Build 20161208 Download

Posted at November 21, 2024 by PCI-DB Team

QNAP TVS-882 TurboNAS QTS Firmware 4.2.2 Build 20161208 Description

[Bug fixes]

- Fixed an issue where Syslog server would not send notification emails when system errors occured.
- Fixed an issue where the upload speed on TS-563 in a 10GbE environment was lower than expected.
- Fixed an issue where taking a large number of snapshots on a volume would cause RTRR jobs to stop unexpectedly
- Fixed an issue where encrypted folders with the ! character (exclamation mark) in their passwords could not be unlocked. 
- Fixed an issue where Qfinder could not display the direct link IP address of the second of two Macs connected to the NAS via Thunderbolt.
- Fixed an issue where the NAS would not go into HDD Standby Mode as scheduled.
- Fixed an issue where CPU fans on TVS-882 would sporadically fail after the firmware was updated to 4.2.2_20161028 or newer versions.
- Fixed an issue where the NAS would not respond after users connected a Wi-Fi dongle to the NAS.
- Fixed an issue where Music Station would not show media folders added from VJBOD after the NAS rebooted. 
- Fixed an issue where File Station would not display the subfolders in certain folders on the left panel.
- Fixed an issue where the information of the default gateway would disappear from the DHCP server settings window after the NAS rebooted.
- Fixed an issue where users could not enable Domain Controller on QTS 4.2.2_20161117.
- Fixed an issue where unsupported Thunderbolt devices would appear on the list of available interfaces when users created a virtual switch in QTS 4.2.2.
- Fixed an issue where Music Station could not display the album covers of the music files stored on other volumes.
- Fixed an issue where Download Station could not download files from certain magnet links.
- Fixed an issue where users could not share domain links via emails or to social networking websites in Photo Station.
- Fixed an issue where the message "External IP has changed, update ddns" would appear in the system event logs even though the external IP address did not change.
- Fixed an issue where NAS-to-NAS backup jobs would fail when "Replicate ACL and extended attributes" is enabled.
- Fixed an issue where RTRR backup jobs would repeatedly upload and update files that were not modified.
- Fixed an issue where TS-x53A with certain firmware versions could not detect D-Link DWA-172 AC600.
- Fixed an issue where the Samba/CIFS upload/download speeds in a 10GbE environment was slower than expected.
- Fixed an issue where the IP address of the DNS server would be displayed incorrectly after users enabled and then disabled Domain Controller.
- Fixed an issue where all the backup jobs for external drives would disappear after users updated the firmware from 4.2.0 to 4.2.2.
- Fixed an issue where users could not create volumes larger than 16 TB in Storage Manager on the x59 series.
- Fixed an issue where "priRequest.cgi" would use too many CPU resources after a large number of snapshots were mounted and the Quota feature was enabled.
- Fixed an issue where connecting to a CHAP-protected iSCSI target without authenticating the connection would cause a call trace.

Firmware Update:

- Read the firmware release notes from above and make sure it is necessary to update the firmware.
- Download the NAS firmware and unzip the IMG file to the computer.
- Before updating the system firmware, back up all the NAS data to avoid any potential data loss from unforeseen issues arising during the system update.
- Click "Browse" to select the firmware image for the system update. Click "Update System" to update the firmware.
- The system update may take seconds, minutes or longer to complete depending on the network connection status. The NAS will inform you when the system update has completed.

Note:

- If the system is running properly, you do not need to update the firmware.
- QTS does not support downgrading the firmware. However, if you choose to apply an older firmware version, please back up all of your important data before downgrading. QNAP is not responsible for any damage to the NAS or its contents after downgrading.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related QNAP Drivers