Avigilon 1.0C-H3A-D1-IR IP Camera Firmware 3.10.0.118 Download

Posted at December 3, 2024 by PCI-DB Team

Avigilon 1.0C-H3A-D1-IR IP Camera Firmware 3.10.0.118 Description

Release Notes:

New Features:
- Added support for Idle Scene Mode.
- Upgraded to OpenSSL version 1.0.2d to improve security when streaming data between the ACC Client software and ACC Server software.
- Improved exposure offset setting. It can now be manually configured.
- Added the iris aperture size display on the Image Settings page of the camera WebUI.
- Improved the ability to configure the threshold for switching day/night mode by changing the control to a slider in the WebUI.
- Added the ability to configure SNMP to version 2c or 3 in the WebUI. When using SNMP v3, the username and password can be configured in the WebUI.

Issues Fixed:

- Fixed an issue where the camera would reboot every 45 days.
- Fixed an issue where the firmware upgrade would not start when the Upgrade button is clicked.
- Fixed an issue where changing the motion detection sensitivity would cut off part of the detection area.
- Resolved issues with the compression formats that caused the Max Bitrate to drop to 0.
- Improved motion detection under low light conditions.
- Fixed an issue where audio playback and camera image were out of sync.
- Fixed an issue where the privacy zones could be dragged beyond the camera field of view.

Upgrading the Camera Firmware

To manually upgrade the camera’s firmware:
1. Download the latest version of the firmware .bin file
2. On the System page, browse and locate the downloaded firmware file.
3. Click Upgrade. Wait until the camera upgrade is complete.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Avigilon Drivers