Transition Networks SISPM1040-382-LRT Switch Firmware 1.27 Download

Posted at November 21, 2024 by PCI-DB Team

Transition Networks SISPM1040-382-LRT Switch Firmware 1.27 Description

Release Notes

1. Add port alias in web UI
2. Add port alias info for port event log in syslog
3. Add port alias info for port linkup/down SNMP trap
4. Add SSH and TACACS+
5. Add setting check in POE Setting page
6. Add CLI commands:
a. security https
b. security ssh
c. no security https
d. no security ssh

Upgrade Firmware

- The Upgrade Firmware page lets you update the switch firmware. Before updating, make sure your TFTP server is ready and the firmware image is on the TFTP server.
- After upgrading firmware successfully, the system MUST be restarted and the new firmware will be applied in next start.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Transition Networks Drivers