LG LHB355 Home Theater System Firmware HB.8.31.370.C Download

Posted at November 21, 2024 by PCI-DB Team

LG LHB355 Home Theater System Firmware HB.8.31.370.C Description

Specifications:

General
- Power requirements: AC 120 V, 60 Hz
- Power consumption: 150 W
- Dimensions (W x H x D): Approx. 430 x 63 x 281 mm
- Net Weight (Approx.): 4.0 kg (8.8 lbs)
- Operating temperature: 5 °C to 35 °C (41 °F to 95 °F)
- Operating humidity: 5 % to 90 %
- Bus Power supply (USB): DC 5V 500 mA

Tuner
- FM Tuning Range: 87.5 to 108.0 MHz
- AM Tuning Range: 520 to 1,710 kHz

Amplifier
- Power output (4 Ω/ PEAK)
- Total 1100 W
- Front 180 W x 2
- Center 180 W
- Rear 180 W x 2
- Sub-Woofer 200 W (Passive)
- Power output (4 Ω/ RMS) THD 10 % (4 Ω / 3 Ω)
- Total 980 W
- Front 160 W x 2
- Center 160 W
- Rear 160 W x 2
- Sub-Woofer 180 W (Passive)

System
- Laser: Semiconductor laser Wavelength: 405 nm / 650 nm
- Signal system: Standard NTSC color TV system
- Frequency response: 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
- Signal-to-noise ratio: More than 85 dB
- Total harmonic distortion: 0.05 % at 1 W
- Dynamic range: More than 95 dB
- LAN port: Ethernet jack x 1, 10 BASE-T/ 100 BASE-TX

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LG Drivers