Posted at November 5, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Transition Networks SISPM1040-384-LRT-B Switch Firmware 1.24 |
---|---|
Category | Router Switch Access Point |
Manufacturer | Transition Networks |
File Size | 3 KB |
Supported OS | OS Independent |
1. Add Sflow.
2. Add SNTP page in Web.
3. Disable PoE legacy support.
4. Fix “button in IP configuration page became gray” issue.
5. Add port alias into Trap and Syslog.
6. Fix VLAN configure fail issue.
7. Fix MRP enabled error message after MRP config save
8. Fix configuration upload error message after config restore
9. Add 1G option for SFP (TN-GLC-T).
10. Add UI for changing managed VLAN.
11. Correct the counters of PoE auto-ping function.
12. Fixed MODBUS TCP issue.
- The Upgrade Firmware page lets you update the switch firmware. Before updating, make sure your TFTP server is ready and the firmware image is on the TFTP server.
- After upgrading firmware successfully, the system MUST be restarted and the new firmware will be applied in next start.
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Router Switch Access Point File Size: 9.4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 777 KB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 5.1 MB OS Independent
Install DriverDevice Type: Network Card File Size: 91.5 MB Windows 7 64 bit ,Windows 8.1 64 bit ,Windows 10 64 bit
Install DriverDevice Type: Network Card File Size: 91.5 MB Windows 7 64 bit ,Windows 8.1 64 bit ,Windows 10 64 bit
Install DriverDevice Type: Router Switch Access Point File Size: 10.1 MB OS Independent
Install DriverDevice Type: Network Card File Size: 288 KB Windows 10
Install DriverDevice Type: Router Switch Access Point File Size: 5.1 MB OS Independent
Install DriverDevice Type: Network Card File Size: 76 MB Windows 7 ,Windows 8.1 ,Windows 10
Install DriverDevice Type: Router Switch Access Point File Size: 10.1 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.