LG LHB306 Home Theater System Firmware BD6.231.00 Download

Posted at November 5, 2024 by PCI-DB Team

LG LHB306 Home Theater System Firmware BD6.231.00 Description

Specifications:

General
- Power requirements: 120 V ~ 60 Hz
- Power consumption: 120 W
- Dimensions (W x H x D) Approx. 360 x 59 x 307 mm (14.1 x 2.3 x 12.0 inches) without foot
- Net Weight (Approx.) 2.8 kg (6.1 lbs)
- Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
- Operating humidity 5 % to 90 %

Inputs/Outputs
- VIDEO OUT: 1.0 V (p-p), 75ohm, sync negative, RCA jack x 1
- HDMI OUT (video/audio): 19 pin (Type A, HDMI Connector)
- ANALOG AUDIO IN: 2.0 Vrms (1 kHz, 0 dB), 600ohm, RCA jack (L, R) x 1
- DIGITAL IN (OPTICAL): Optical Connector x 1
- PORT. IN: 0.5 Vrms (3.5 mm stereo jack)

Tuner
- FM Tuning Range: 87.5 to 108.0 MHz or 87.50 to 108.00 MHz

Amplifier
- Power output (3ohm), (RMS), THD 10 % (3 ohm/ 3 ohm):
- Total: 850 W
- Front: 141 W x 2
- Center: 141 W
- Surround: 141 W x 2
- Sub-Woofer: 145 W (Passive)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LG Drivers