Parrot Sequoia Drone Sensor Firmware 1.1.1 Download

Posted at December 22, 2024 by PCI-DB Team

Parrot Sequoia Drone Sensor Firmware 1.1.1 Description

UPDATING SEQUOIA

There are two ways to update Sequoia.

Via USB

To update Sequoia via USB you must use a micro USB OTG cable male plug with a USB female socket (Diagram H). 

- Connect your USB drive to a computer and make sure that it contains no files in .plf format.
- Download the update file available in .plf format.
- Copy the file to the root directory on your USB key without putting it in a folder or renaming it.
- Connect your micro USB OTG cable to the USB host port on the multispectral sensor.
- Connect the USB key containing the update file to the other end of the cable.
- Turn on Sequoia.
The update runs automatically. During the update the multispectral sensor light flashes orange. Once the update is complete the light turns green.

Via an SD

Before you begin make sure that the multispectral sensor is connected to
the sunshine sensor.

- Connect your USB key to a computer and make sure that it contains no files in .plf format.
- Download the update file available in .plf format.
- Copy the file to the root directory on your SD Card without putting it in a folder or renaming it.
- Insert the SD card in the sunshine sensor.
- Turn on Sequoia.
The update runs automatically. During the update the multispectral sensor light flashes orange. Once the update is complete the light turns green.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Parrot Drivers