SiS SiS6326 Graphics Driver 1.31 for Windows 2000 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	SiS SiS6326 Graphics Driver 1.31 for Windows 2000
Category	Graphics Board
Manufacturer	SIS
File Size	105 KB
Supported OS	Windows 2K

SiS SiS6326 Graphics Driver 1.31 for Windows 2000 Description

Windows 2000 supports Plug and Play function so a SiS6326 card will be detected automatically by a Windows 2000 system if it is installed at the first time. A "Found New Hardware Wizard" will appear to guide users to locate the driver.

Here is the driver installation procedure.

1. Press "Next" in "Found New Hardware Wizard" to continue.
2. The wizard will show the found device as "Video Controller (VGA compatible)" and ask what to do next. Select "Display a list of the known drivers for this device so that I can choose a specific driver" then press "Next".
3. Select "Display Adapters" as the hardware type then press "Next".
4. The wizard will give a list of display devices and ask to select a device driver. Press "Have Disk".
5. A "Install From Disk" will pop out. Press "Browse¡K" to assign the driver path.
6. In the "Locate File" window, find out the file "Sisv6326.inf" then press "Open".
7. After go back to "Install From Disk" window, press "OK".
8. After go back to "Select a device driver" window (step 4), a "SiS 6326" message will appear as "Models". Press "Next".
9. Press "Next" under window "Start Device Driver Installation" to proceed the installation.
10. After the installation is complete, the wizard will inform users the completeness. Press "Finish".
11. Restart the computer.

If the "Found New Hardware Wizard" does not pop out itself, users are able to start it upby the following steps.

1. Open "My Computer".
2. Open "Control Panel".
3. Open "Add/Remove Hardware".
4. The "Add/Remove Hardware Wizard" will appear. Press "Next".
5. Select "Add/troubleshoot a device" as hardware task then press "Next".
6. Select "SiS6326" or "None of the following devices" then press "Next".
7. This will guide users to the above step 2. Now, users are able to follow up the procedure to finish the installation.

If SiS6326 driver has ever been installed and a user would like to update its driver, he/she can follow up the below steps to do it.

1. Open "My Computer".
2. Open "Control Panel".
3. Open "System".
4. Select "Device Manager" under the tab "Hardware" in "System Properties".
5. Double click on "SiS 6326".
6. Open "Driver" under "SiS 6326 Properties".
7. Press "Update Driver".
8. The "Upgrade Device Driver Wizard" will guide users to finish the procedure.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related SIS Drivers