PCI-DB.com
  1. Driver
  2. Graphics Board
  3. ECS G45T-M2 (V1.0A) Intel Graphics Driver 14.42.1.5248 for XP

ECS G45T-M2 (V1.0A) Intel Graphics Driver 14.42.1.5248 for XP Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically
Device NameECS G45T-M2 (V1.0A) Intel Graphics Driver 14.42.1.5248 for XP
CategoryGraphics Board
ManufacturerINTEL
File Size20.9 MB
Supported OSWindows XP
Download Now

ECS G45T-M2 (V1.0A) Intel Graphics Driver 14.42.1.5248 for XP Description

CPU
- FSB 1333/1066/800 MHz

CHIPSET
- Intel Eaglelake G45 & ICH10
- North Bridge: Intel Eaglelake G45
- South Bridge: Intel ICH10

GRAPHICS
- Integrated Intel Graphics Media Accelerator X4500HD ( GMA X4500HD )
- Integrated DirectX 10 graphics processor
- Max Dynamic Video Memory : 1759MB (Vista) / 1GB (WinXP)

MEMORY
- Dual-channel DDR2 memory architecture
- 4 x 240-pin DDR2 DIMM socket support up to 16GB
- Support DDR2 800/667 DDR2 SDRAM

EXPANSION SLOT
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE   
- Support by Intel ICH10
- 6 x Serial ATAII 3.0Gb/s devices
AUDIO    - RealTek ALC888VC 8ch High Definition audio CODEC

LAN
- Gigabit LAN, RealTek 8111C GigaLAN controller

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 4 x USB ports
- 1 x RJ45 LAN connector
- 1 x Audio port
- 1 x VGA port
- 1 x DVI connector
- 1 x Parallel port (LPT1)

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- CPUFAN/PWRFAN connectors
- 1 x SPDIF out header
- 6 x Serial ATA 3Gb/s connectors
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1x CD in header
- 4 x USB 2.0 headers support additional 8 USB ports
- 1 x COM1 header
- 1 x Clear CMOS header

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports STR(S3)& STD(S4)
- Supports Plug and Play, STR/STD, Hardware monitor, PCI interrupt selection, ACPI & DMI, CPU FSB adjustment (increase of 1MHz)
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Memory voltage adjustable
- PECI Supports

FORM FACTOR
- Micro-ATX Size, 244mm*244mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers

Find Missing Drivers

Recent Devices

Recent Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.