Gigabyte G1.Sniper 5 (rev. 1.x) Intel USB 3.0 Driver 2.5.0.19 for Windows 7 Download

Posted at November 21, 2024 by PCI-DB Team

Gigabyte G1.Sniper 5 (rev. 1.x) Intel USB 3.0 Driver 2.5.0.19 for Windows 7 Description

Specifications:

- CPU
Support for Intel Core i7 processors/Intel Core i5 processors/Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1150 package
L3 cache varies with CPU

- Chipset
Intel Z87 Express Chipset

- Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Support for DDR3 3000(O.C.) / 2933(O.C.) / 2800(O.C.) / 2666(O.C.) / 2600(O.C.) / 2500(O.C.) / 2400(O.C.) / 2200(O.C.) / 2133(O.C.) / 2000(O.C.) / 1866(O.C.) / 1800(O.C.) / 1600 / 1333 MHz memory modules
Support for non-ECC memory modules
Support for Extreme Memory Profile (XMP) memory modules

- Onboard Graphics
Integrated Graphics Processor:
2 x HDMI ports, supporting a maximum resolution of 4096x2160
Support for HDMI 1.4a version.
1 x DisplayPort, supporting a maximum resolution of 3840x2160
Support for DisplayPort 1.2 version.
Maximum shared memory of 1 GB

- Audio
Creative Sound Core 3D chip
Support for Sound Blaster Recon3Di
High Definition Audio
2/5.1-channel
Support for S/PDIF Out

- LAN
1 x Qualcomm Atheros Killer E2201 chip (10/100/1000 Mbit) (LAN1)
1 x Intel GbE LAN phy (10/100/1000 Mbit) (LAN2)
Teaming is not supported.

- Wireless Communication module
Wi-Fi 802.11 a/b/g/n, supporting 2.4/5 GHz Dual-Band
Bluetooth 4.0, 3.0+HS, 2.1+EDR

- Expansion Slots
2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
3 x PCI Express x1 slots

- Multi-Graphics Technology
Support for 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology

- Storage Interface
Chipset:
6 x SATA 6Gb/s connectors (SATA3 0~5) supporting up to 6 SATA 6Gb/s devices
Support for RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 88SE9230 chip:
4 x SATA 6Gb/s connectors (GSATA3 6~9) supporting up to 4 SATA 6Gb/s devices
Support for RAID 0, RAID 1, and RAID 10

- USB
Chipset:
Up to 2 USB 3.0/2.0 ports (available through the internal USB header)
Up to 6 USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
Chipset + 2 Renesas uPD720210 USB 3.0 Hubs:
Up to 8 USB 3.0/2.0 ports (6 ports on the back panel, 2 ports available through the internal USB header)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x PCIe power connector
10 x SATA 6Gb/s connectors
1 x CPU fan header
7 x system fan headers
1 x water cooling fan header (CPU_OPT)
1 x front panel header
1 x front panel audio header
2 x USB 3.0/2.0 headers
2 x USB 2.0/1.1 headers
1 x Clear CMOS jumper
1 x heatsink LED power connector
1 x heatsink fan connector
1 x power button
1 x reset button
1 x Clear CMOS button
2 x BIOS switches
Voltage measurement points

- Back Panel Connectors
1 x PS/2 keyboard/mouse port
2 x HDMI ports
1 x DisplayPort
1 x coaxial S/PDIF Out connector
1 x optical S/PDIF Out connector
6 x USB 3.0/2.0 ports
2 x USB 2.0/1.1 ports
2 x RJ-45 ports
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In/Mic In, Line Out, Headphone/Speaker Out)

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
CPU/System/PCH temperature detection
CPU/CPU_OPT/System fan speed detection
CPU/System overheating warning
CPU/CPU_OPT/System fan fail warning
CPU/CPU_OPT/System fan speed control

- BIOS
2 x 128 Mbit flash
Use of licensed AMI EFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers