PCI-DB.com
  1. Driver
  2. Scanner Digital Camera Webcam
  3. Panasonic AU-VCVF1G Viewfinder Firmware 1.10

Panasonic AU-VCVF1G Viewfinder Firmware 1.10 Download

Posted at April 30, 2024 by PCI-DB Team

Install Driver Automatically
Device NamePanasonic AU-VCVF1G Viewfinder Firmware 1.10
CategoryScanner Digital Camera Webcam
ManufacturerPanasonic
File Size1.4 MB
Supported OSOS Independent

Panasonic AU-VCVF1G Viewfinder Firmware 1.10 Description

Changes:

- [35 | HS] CSS(Custom Splash Screen): The display screen during the boot-up process (Splash Screen) can be customized to show a company’s logo, etc. This software helps deter theft by using the customized Splash Screen as the owner's digital name tag. Customize the Splash Screen as your company logo, Register owner information, Password setting. You can set a password to prevent rewriting of the above registered contents and to prevent updating / downgrade execution.
- [35 | HS] The time required for displaying GUI at boot-up is reduced.
- [35 | HS] The size of the REC mark on OSD is increased.
- [35 ] SYSTEM MODE can be changed by selecting the preset item.
- [35 ] ISO BASE ([800B] / [5000B]) is displayed. (VF, MON OUT, LCD (VIEW))
- [35 | HS] RESTART function is added to the control panel. RESTART button is added so that the camera can be rebooted by means of the control panel, instead of the power switch, after the system mode is changed. RESTART button is added so that the camera can be rebooted, after NETWORK SEL is changed.
- [35 ] For the following settings where VFR is possible, VFR ON/OFF Switching feature is provided. REC FORMAT: LT codec and PIXEL: CROP mode
- [35 | HS] Icons are added for indicating FF/REW playback. The 16x high-speed playback function is added.
- [35 | HS] The following compatible wireless LAN module is added. D-Link DWA171 (Australia)

Important: Please read before performing update:

- Update work may take approximately 15 minutes, use secure power supply (AC adaptor), unexpected shutdown while in update may cause unrecoverable failure.
- Do NOT eject SD memory card while update is in progress (while access LED blinks), interrupting communication between SD card and equipment may cause unrecoverable failure.

Upgrade Instructions:

- Download the firmware from the website.
- Insert an SD memory card into the SD card slot ( NOT microP2 card slot ) on the unit.
- Format the SD card (MENU: SYSTEM SETTINGS > CARDS/MEDIA > FORMAT CARD > SD CARD)
- Extract the ZIP package (you will see "PRIVATE" folder).
- Mount the formatted SD card to the computer then copy the "PRIVATE" folder to the SD card.
- Insert the SD card into the SD card slot (NOT microP2 card slot) on the unit.
- Press INFO button to display INFO screen. Press the operation button of VERSION and press the Jog Dial..
- When “UPDATE” menu item appears, press the operation button of UPDATE > OK
- Wait until the “Version update successful” dialog is displayed. It may take approximately 15 minutes (Maximum).
- Remove the SD card.
- Switch OFF the power, and disconnect and connect DC power > switch ON the power to complete.
- Make sure the firmware version.

Troubleshoot:

“UPDATE” menu item does not appear
- It may happen in following cases; When package file or copied location are NOT correct (“PRIVATE” folder was not copied to the upper directory of the SD card).

VERSION UPDATE ERROR! Screen is displayed!
- This error will be happened in following case; When firmware package used is for other products (Check if the package is for the right product) or when firmware package is corrupted (Download the firmware package and try again). 

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you're properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.