NETGEAR WN311B WiFi Adapter Software/Driver 7.1 Download

Posted at November 5, 2024 by PCI-DB Team

NETGEAR WN311B WiFi Adapter Software/Driver 7.1 Description

WN311B Software Version 7.1

Win7: 
Driver Version: 5.60.48.35 
Utility Version: 9.64.1.8

Vista

: 
Driver Version: 5.60.48.35 
Utility Version: 9.64.1.8

XP: 

Driver Version: 4.170.75.0 
Utility Version: 4.22.15.8 

New Features:

- Supports Windows XP, Vista 32bit, and Vista 64bit.
- Pass WHQL for Win7. 

Installation

- Download the file to a convenient location such as your desktop.
- Shut down your computer.
- Unplug your computer from the wall,Open your computer case. Ground yourself on an outside metal part of the computer, such as a flat surface on the back. Taking care only to touch the silver mounting bracket on the end, remove the adapter from your computer.Replace the computer case.
- Plug the computer in.
- Power up the computer and wait for it to reboot.
- Select Start > All Programs. Then select the card, then Uninstall. Follow the on screen steps to remove the old version of the software.
- Run Setup file from the folder where you saved the downloaded file.
- Select the Country Domain, click Next
- Click OK at the Country Domain Selection warning.
- Click Yes to the License Agreement.
- Click Finish
- Completely power down your computer.Unplug your computer from the wall.Open your computer case.Ground yourself on an outside metal part of the computer, such as a flat surface on the back.Taking care only to touch the silver mounting bracket and the top of the adapter, place the adapter securely into your computer.Replace the computer case.
- Power up the computer and wait for it to reboot.
- Click Next to start the Found New Hardware Wizard.Click Finish when Found New Hardware Wizard is completed.
- Complete the NETGEAR Touchless Wizard.

About Wireless LAN Driver:

Windows OSes usually apply a generic driver that allows systems to recognize the wireless component. However, in order to use all available features of this hardware, you must install the appropriate drivers.

Enabling the wireless card allows systems to read chipset information and manufacturer name, as well as connect to a network without using an Ethernet cable.

Updating the driver version can resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, improve transfer speed, as well as bring various other changes.

As for applying this release, the installation steps should not pose to much of a challenge since each producer intends to make the procedure as easy as possible: just download the package, run the setup, and follow the on-screen instructions.

Bear in mind that we do not recommend you install this release on OSes other than the specified ones even though other platforms might also be suitable. Also, when the update has finished, do perform a restart to ensure that all changes take effect properly.

Therefore, if you wish to apply this package, click the download button, and setup the wireless card on your system. Moreover, if you want to stay “updated one minute ago,” check with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers