Netgear DGFV338 Firmware 302-20 Download

Posted at December 19, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Netgear DGFV338 Firmware 302-20
Category	Firmware
Manufacturer	Netgear
File Size	7.4 MB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Netgear DGFV338 Firmware 302-20 Description

Note: You must restore the device to factory defaults BEFORE The upgrade. Else the upgrade may cause your device to fail.

This upgrade is only for the router firmware. Modem firmware remains the same as previous release (2.0.55) - hence no need to upgrade the same.

Bug Fixes:

* Support of characters ? & : in VPN User name
* Support for East-Asian character encoding on IE 6 & 7
* Support of character ? in IKE policy
* Non default 1492 MTU on PPPoE
* Bug in DHCP reservation resolved
* UPnP has compatibility issues with Windows XP & Vista
* Pass Phrase for WEP is compatibility with other devices.
* PPP Idle timeout does not work if there are huge time changes.
* Bug with Moscow time zone.




DGFV338
ProSafe Wireless ADSL Modem VPN Firewall Router

Key Features of the NETGEAR ProSafe DGFV338

The NETGEAR ProSafe DGFV338 with eight-port switch connects your local area network (LAN) to the Internet through an internal ADSL modem or through the Ethernet port via an external modem. It provides wireless LAN connectivity operating at 2.4GHz (802.11b/g). The NETGEAR ProSafe DGFV338 has a built-in Stateful Packet Inspection Firewall (SPI) preventing Denial of Service attacks and provides Internet access for up to 253 users. The NETGEAR ProSafe DGFV338 provides you with multiple Web content filtering options, plus browsing activity reporting and instant alerts?both, via e-mail. Network administrators can establish restricted access policies based on time-of-day, Website addresses and address keywords, and share high-speed cable/DSL Internet access for a local network.

With minimum setup, you can install and use the firewall within minutes.
The NETGEAR ProSafe DGFV338 provides the following features:
￭ An internal ADSL modem supporting Annex A or Annex B (depending upon region).
￭ One 10/100 Mbps Ethernet WAN port.
￭ 802.11g, 802.11b, 802.11g/b, or Auto 108Mbps.
￭ Support for up to 50 IPSec VPN tunnels.
￭ Easy, web-based setup for installation and management.
￭ URL keyword Content Filtering and Site Blocking Security.
￭ Quality of Service (QoS) support for traffic prioritization.
￭ Built in 8-port 10/100 Mbps switch.
￭ Extensive Protocol Support.
￭ SNMP for manageability.
￭ Front panel LEDs for easy monitoring of status and activity.
￭ Flash memory for firmware upgrade.
￭ Auto Sensing and Auto Uplink

Full Routing on Both the ADSL and 10/100 WAN Port

You can install, configure, and operate the DGFV338 to take full advantage of a variety of routing
options on both the DSL and broadband WAN ports, including:
￭ Internet access via either the internal ADSL modem or through the Ethernet port connected to
an external modem.
￭ Auto Rollover Mode between the internal ADSL modem and the external 10/100 ethernet
WAN port. If the primary connection fails, the DGFV338 can automatically establish a backup
connection via the secondary connection.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Netgear Drivers