Autel Robotics X-Star Premium Drone Firmware 1.1.3 Download

Posted at December 31, 2024 by PCI-DB Team

Autel Robotics X-Star Premium Drone Firmware 1.1.3 Description

Release Notes:

- Enabled waypoints, orbit and follow mode that will work with a new APP version that is going to be released soon
- Added gimbal roll adjustment feature and optimized gimbal parameters
- Fixed clip preview errors and compatibility issues of SD cards
- Improved Starlink Positioning System's performance by adding angle compensation
- Fixed gimbal lock issues with certain older version of Android/iOS phones
- Fixed other bugs

To perform a firmware update on your X-Star drone:

Step 1: Ensure the aircraft battery and remote controller are fully charged. If the battery holds less than a 50% charge, the update may not be able to complete.
Step 2: Power down the remote controller and aircraft.
Step 3: Download the firmware update from our support site.
Step 4: Insert the provided microSD card into a microSD Card Reader (not provided), and plug it into your computer.
Step 5: Copy the firmware file to the root directory on the microSD card.
Step 6 Power on the remote controller and the aircraft:.
Step 7: Watch the LCD display on the remote controller, and wait for the remote controller to connect to the aircraft. 
Step 8: Insert the microSD card into the camera.
Step 9: Watch the LCD on the remote controller to see the file begin unpacking (which takes 30 to 60 seconds). If unpacking fails, delete the update file from the microSD card and start again at Step 1.
Step 10: Periodically check the LCD to monitor each component being updated. The update may take up to 30 minutes to complete.
Step 11: After the LCD indicates that each update was successful, power off the aircraft and the remote controller to complete the update. Power back on and you are ready to fly.

About Drone Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Autel Robotics Drivers