Planet WAPC-1232HP AP Controller Firmware 1.342c160114 Download

Posted at December 21, 2024 by PCI-DB Team

Planet WAPC-1232HP AP Controller Firmware 1.342c160114 Description

Fixes:

1. Modified UI Structure and fixed UI related issues.
2. Supported APs with a different VLAN.

NOTE:

- This firmware is only for the WAPC-1232HP. A different firmware cannot be used for a different version. 
- Thus, the WAPC-1232HP's firmware only can be used in the corresponding models.

Upgrade Method

1. To upgrade the firmware of your device, please logon to the machine
2. Go to "System-> Web Firmware Upgrade" or "Maintenance-> Switch Maintenance-> Web Firmware Upgrade".
3. Then, click the Browse button to allocate the firmware image file (e.g. FW_WAPC-xxxxxx_V1.342cxxxxxx.dat) on your PC.
4. After the upgrade is completed, please navigate to the "System-> Factory Default" page to reset it to factory default.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Planet Drivers