Planet WDAP-C7200AC AP Controller Firmware 1.3465cb151224 Download

Posted at December 18, 2024 by PCI-DB Team

Planet WDAP-C7200AC AP Controller Firmware 1.3465cb151224 Description

Fixes:

1. Supports AP controller in the "Managed AP" mode.
2. Fixed UI related issues.

NOTE:

1. This firmware is only for the WDAP-C7200AC. A different firmware cannot be used for a different version. Thus, the WDAP-C7200AC's firmware only can be used in the corresponding models.
2. If any default value has been changed/customized in new firmware version, user must upload the "config-xxx.dat" (xxx is the build number)
file to apply the new settings after finished firmware upgrade.
3. Before upgrade, please ensure your current firmware version is not v20140530 since this version is not compatible with the latest version. If you need to upgrade the version v20140530, please contact your local seller or contact Planet support team.
4. Please choose the config file for uploading according to local regulatory, for example, if your country conforms to the ETSI regulatory,
please use the "Config_xxx_Vxxx_ETSI" to upload, otherwise, please use the "Config_xxx_Vxxx_FCC".
5. The config file will not modify the domain setting, but only set a fixed 5GHz channel as default from the channel list.
"Config_xxx_Vxxx_ETSI" is fixed to channel 36 at 5GHz, and the "Config_xxx_Vxxx_FCC" is fixed to channel 149 at 5GHz.

Upgrade Method

1. To upgrade the firmware of your AP, please logon to the machine and click on the "Management" menu.
2. Then, choose "Upgrade Firmware".
3. On this page, you can use the Browse button to allocate the firmware bin file (e.g. FW_WDAP-C7200AC_V1.3465xxxxxx.bin) on your PC.
4. Once the new firmware file is selected, click the "Upload" button to start the upgrade process.
5. After the upgrade is completed, please navigate to "Reload Settings" page and then click "Browse..." button.
6. Select the "Config_WDAP-C7200AC_V1.3465xxxxxx.dat" file, click the "Upload" button to load the customized settings.
If your country conforms to the FCC regulatory, please reload the config of FCC, otherwise, please reload the config of ETSI.
7. After finished, please reset the AP to default setting and re-configure your AP.
(Management-> Reload Settings-> Reset Settings to Default)

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Planet Drivers