Posted at November 2, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Planet WNAP-6350 Access Point Firmware 2.6_r3554 |
---|---|
Category | Router Switch Access Point |
Manufacturer | Planet |
File Size | 5.5 MB |
Supported OS | OS Independent |
- This firmware is only for WNAP-6350. There is no way to use the different firmware in the different versions.
- Thus, the WNAP-6350's firmware only can be used in the correspondent models.
1.To upgrade the firmware of your AP, please logon machine and click on the "Advanced" menu.
2.In "Advanced" menu, choose "Firmware Upgrade".
3.In this page. You can use the Browse button to allocate the firmware file on your PC.
4.Once the new firmware file is selected, click "Upload" button to start the upgrade process.
5.After the upgrade is completed, please reset the AP to default setting and re-configure your AP.
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Router Switch Access Point File Size: 2.8 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 10.8 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 33.4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 2.8 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 33 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 3 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.