Posted at November 21, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Planet WNAP-1110v2 Range Extender Firmware 3.7.2 Build 140115 |
---|---|
Category | Router Switch Access Point |
Manufacturer | Planet |
File Size | 3.5 MB |
Supported OS | OS Independent |
- This firmware is only for WNAP-1110(v2). There is no way to use the different firmware in the different versions.
- Thus, the WNAP-1110's firmware only can be used in the correspondent models.
1. To upgrade the firmware, please logon machine and click on the "System Tools" menu.
2. In "System Tools" menu, choose "Firmware Upgrade".
3. In this page. You can use the Browse button to allocate the firmware file on your PC.
4. Once the new firmware file is selected, click "Upgrade" button to start the upgrade process.
5. After the upgrade is completed, please reset the device to default setting and re-configure your device.
If you intend to apply this firmware, first go to the system information page of the extender and make sure that the currently applied version isn’t either newer or matching this release; you should get the downloadable package only after you have done this.
Updating to a new firmware can resolve vulnerability problems, fix various compatibility issues, enhanced existing features, correct different language-related errors, and improve overall performance and stability.
As for the installation steps, since there are numerous extender models, it would be best if you read and, above all, understand the update procedure before you proceed to applying the new firmware; this holds true even if you are a power user.
Bear in mind, that during the upgrade, you mustn’t use the device’s buttons or interrupt the process in any way. Doing so can cause serious malfunctions to the wireless extender.
Therefore, if this firmware satisfies your needs, get the desired version, and install it to your system; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 33.4 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 10.8 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 2.8 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 2.8 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 33 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 3 MB OS Independent
Install DriverDevice Type: Network Ip Surveillance Baby Camera File Size: 4 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.