Planet WNAP-C3220A Access Point Firmware 1.3456cb151225_ETSI Download

Posted at April 29, 2024 by PCI-DB Team

Planet WNAP-C3220A Access Point Firmware 1.3456cb151225_ETSI Description

NOTE:

1. This firmware is only for the WNAP-C3220A. A different firmware cannot be used for a different version. Thus, the WNAP-C3220A's firmware only can be used in the corresponding models.
2. If any default value has been changed/customized in new firmware version, user must upload the "config-xxx.dat" (xxx is the number to be filled out) file to apply the new settings after finished firmware upgrade.

Upgrade Method:

1. To upgrade the firmware of your AP, please logon to the machine and click on the "Management" menu.
2. Then, choose "Upgrade Firmware".
3. On this page, you can use the Browse button to allocate the firmware bin file (e.g. FW_WNAP-C3220A_V1.3465xxxxxx.bin) on your PC.
4. Once the new firmware file is selected, click the "Upload" button to start the upgrade process.
5. After the upgrade is completed, please navigate to "Reload Settings" page and then click the "Browse..." button.
6. Select the "Config_WNAP-C3220A_V1.3465xxxxxx.dat" file and click the "Upload" button to load the customized settings. If your country conforms to the FCC regulatory, please reload the config of FCC, otherwise, please reload the config of ETSI.
7. After it is done, please reset the AP to default setting and re-configure your AP. (Management-> Reload Settings-> Reset Settings to Default)

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Planet Drivers