Intel R1000JP Server System BIOS 02.01.0001 Download

Posted at November 21, 2024 by PCI-DB Team

Intel R1000JP Server System BIOS 02.01.0001 Description

Supported Platforms:

- S2400BB
- S2600CP
- S2600CO
- W2600CR
- S2400EP
- S2600GL
- S2600GZ
- S2600IP
- S2600JF
- S2400LP
- S2400SC
- S2600WP
- S4600LH
- S1400SP
- S1400FP
- S1600JP

Versions in this package:

- BIOS: 02.01.002
- ME: 02.01
- BMC: 1.19
- FRUSDR: 1.05

Fixes BIOS 02.

01.0001:
- Fixed: Network Stack is hidden and the default value of IPV4 PXE option is set to disabled.
- Fixed: The Onboard infiniband controller name is shown incorrectly in BIOS setup on some half-width board.
- Fixed: Adaptec 6405E installation causes system unstable in earlier BIOS POST.
- Fixed: System boot takes longer time when Throttling mode is set to "Auto" with particular memory DIMM populated.
- Fixed: 2 ports of Qlogic QLE2562 card can not be configured in Option rom.
- Fixed: Device manager of Windows Server 2008R2/2012 shows some unknown devices when Intel Xeon processor E5-4600/2600/2400 v2 series installed.
- Fixed: The fourth NIC information is missing in SMBIOS table Type 41 on Intel Server Boards S2600GZ and S1400SP.
- Fixed: Unexpected "." is shown after the product name in SMBIOS Type 1.
- Fixed: Some BIOS options have different values after loading Default (press F9 in setup) and CMOS clear.
- Fixed: Wake-on-LAN (WOL) feature does not work on Windows Server 2008R2/2012 OS.
- Fixed: Unable to enter the LSI MegaRAID Configuration Utility by pressing "Ctrl+C" on LSI SAS 9200 controllers in some specific scenario.
- Add UEFI 2.3.1 support.
- Add UEFI PXE support.
- Add UEFI Driver Control option in BIOS setup menu.
- Add Intel Virtualization technology support for Intel Xeon processor E5-4600/2600/2400 v2 series.
- Add QLogic QLE2762 Gen3 support for Intel Server Board S2600GZ/GL.
- Add an option in setup layout for enable/disable Intel RAID modules RMT3CB080/RMS25CB080/RMS25CB040.
- Add C600 unsupported Upgrade Keys warning message implemented.
- Add Intel SAS module RMS25LB Gen3 support for S2600JF, S2600WP, S1600JP.
- Update Intel Boot Agent (1G PXE Option ROM, 10G PXE Option ROM, iSCSI Option ROM, FCoE Option ROM).
- Update ESRT2 Option ROM for SCU and AHCI.
- Update RSTe 3.7 Option ROM.
- Update micro code for Intel Xeon processor E5-4600/2600/2400 processors.
- Update micro code for Intel Xeon processor E5-4600/2600/2400 v2 processors.
- Update ACM 2.2.
- Update "Extended ATR" default setting to 0x01 from 0x03.
- Update ATA secure erase to non-frozen state.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers