ZyXEL AG-320 WLAN Driver 2.0.0 for XP/Vista Download

Posted at November 21, 2024 by PCI-DB Team

ZyXEL AG-320 WLAN Driver 2.0.0 for XP/Vista Description

Known issues

:

1. Interoperability issue: AP is WPA2-mixed (or WPA2-PSK-Mixed mode) mode, DUT can’t associate to AP on WPA (or WPA-PSK) with Funk Odyssey client v4.5 (DUT utility and Windows Zero Configuration don’t cause this issue.)
2. In Win2K/XP/XP64, Wireless client didn’t install the root CA. User used “Validate Server Certificate” mode to authenticate; it passed the authentication.
3. DUT set in long preamble, but DUT send out the packet with short preamble.
4. In all OS, DUT associate to AP or try to associate to AP repeatedly, DUT utility would hang sometimes.
5. Interoperability issue: AP (ZyAIR G-3000H v3.50 [AAC.1] C0) is WPA-MIX mode, two DUT (WPA-PEAP) can't access each other, they only can access Ethernet station. If G-3000H is WPA2-PSK-MIX mode, two DUT sometimes can't access each other.
6. After uninstalling driver and utility, *.inf files can’t be removed.
7. Manual Start OTIST, DUT still could connect AP without OTIST start. DUT should disconnect to AP.
8. DUT connect to AP with profile successfully. Then DUT disconnected and start OTIST function. DUT couldn’t connect to AP which is running OTIST function and show wrong setup key error message.
9. IOP: P-2602HWL-D1A wireless QoS function(by application port) isn’t noticeable sometimes if wireless clients are ZyXEL G-120/AG-120/G-320H/AG-320 (chipset: ZD1212B, driver: 1.5.4.6). (If clients are Intel 2200 or 2915 chipset, driver: 9.0.4.17, the QoS function works normally.)
10. In all OS, sometimes GUI-> Survey function works failure, survey list becomes empty. (If the neighbor AP’s SSID numbers are more than 50, this issue usually happened.)
11. In PQA_SW1 tester office (Neighbor AP more than 50), the ZyDAS ZD1212b chipset DUT (G-120/G-320H/AG-120/AG-320 driver: v1.5.4.6) connected ability is weak, many features sometimes can’t work normally. (Ex: Site survey、OTIST、WPA、WPA2…..)
12. In Vista/Vista64, utility initial time takes approximately 1.5 to 2 minute.
13. If ZyXEL P-335U works on WPA/WPA2 mode, the re-authentication timer is “600” seconds. It’s more than 3 minutes that DUT couldn’t associate to AP automatically after “re-authentication”. This issue occurs on all OS.

Notes:

1. No Refresh icon in Site Survey and Profile page.
2. It does not support when security is 802.1x and dynamic WEP key is disabled.
3. If SSID’s length is more than 23, OTIST can’t work.
4. It must select the check box of “Mark this key as exportable. This will allow you to back up or transport your keys as a later time” when users import the certificate. If users don’t select it, the EAP-TLS/WPA-TLS/WPA2-TLS mode can’t associate to AP.
5. In Software AP, it can’t clear all MAC in Association List of Link Info. That’s ZyDAS driver issue.
6. When running on the Ad-Hoc mode with 802.11b+g, DUT runs on 802.11b frequency. User can change this default value from advance tab of ZyXEL wireless PCI Adapter. Change IBSS_Wireless_Mode’s value to IBSS_G_Mode.
7. In Vista/Vista64, user’s PC should use 1GB RAM or higher.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers