ZyXEL VMG8924-B10A Router Firmware 100AAKL0C0 Download

Posted at May 3, 2024 by PCI-DB Team

ZyXEL VMG8924-B10A Router Firmware 100AAKL0C0 Description

Specifications

- Wireless
IEEE 802.11ac 5 GHz with up to 1.3 Gbps data rate
IEEE 802.11n 2.4 GHz with up to 300 Mbps data rate
Wireless Protected Setup (WPS)
WEP data encryption (64/128 bit)
WPA/WPA2, WPA-PSK/WPA2-PSK
Wi-Fi scheduling
Multiple SSID (up to 4)

- VDSL and ADSL Compliance
VDSL/ADSL2+ compliance
VDSL2 (G.993.2), band plan Annex A, Annex B (over POTS)
Support profile 8a, 8b, 8c, 8d, 12a,12b, 17a
VDSL1 (G.993.1)
ADSL2+ (G.992.5) support Annex A, I, M
ADSL2 (G.992.3) support Annex A, I, L, M
ADSL (G.992.1) Annex A
ANSI T1.413 issue 2
G.INP (G.998.4)
G.vector (G.993.5)

- VLAN/QoS
Support flexible traffic classification
6-bit DiffServ Code Point (DSCP, RFC 2474)
802.1P 3-bit Class of Service (CoS)
802.1Q 12-bit VLAN ID

- Router/Bridge Features
IEEE 802.1d transparent bridge
PPP over Ethernet (RFC 2516)
MAC encapsulation routing/IPoE
Network Address Translation (NAT)/Network
Address Port Translation (NAPT)
NAT server (Port forwarding)
DHCP client/server/relay
DNS proxy/dynamic DNS
Static route/policy routing
IGMP v1, v2, v3
IP protocol v6 (IPv6)

- Voice Functionality
SIP v2 (RFC 3261)/SDP (RFC2327/3264)
RTP/RTCP (RFC1890)
Codec: G.711, G.726, G.722
G.168 echo cancellation
Voice Activity Detection (VAD)/Comfortable Noise Generator (CNG)
Dynamic jitter butter
Dual Tone Multi Frequency (DTMF)
CLIP/CLIR

- Phone Features
Caller ID (FSK.DTMF)
Call forwarding (No condition, Busy, No answer)
Call transferring (Blind, ConsultOnHold,Attendant)
Three way conference
Abbreviated dialing (Speed dial)
Interactive Voice Response (IVR)
Flash hook timer
Message waiting indicator (RFC 3842)
T.38 fax relay
Transparent fax rely over G.711
Flexible dial plan (RFC3525 section 7.1.14)

- Security
Firewall
Generic packet filter
DoS attack prevention
Parental control

- USB
File sharing
3G backup

- Management
Web GUI (HTTP/HTTPS)
Command Line Interface (CLI)
Firmware upgrade via HTTP/FTP/TR-069
DSL forum TR-069/TR-098/TR-111/TR-064
802.1ag Connectivity Fault Management (CFM)

- Hardware Specifications
WAN:
One RJ-11 interface for VDSL (over POTS)
One RJ-45 connector for Giga-Ethernet WAN port
LAN: Four 10/100/1000M Auto MDI/MDI-X RJ-45 ports
Wireless:
Two internal 3 dBi antennas (2.4 GHz)
Three internal 3 dBi antennas (5 GHz)
Button:
One reset button
One WPS on/off switch button
One WLAN on/off switch button
One LED on/off switch
Two FXS ports
Two USB 2.0 host ports
Status LEDs indicators: PWR/SYS, DSL,INTERNET, WAN, ETHERNET, WiFi 2.4G, WiFi 5G,Phone1, Phone2, USB1 and USB2
Power supply: 12 V DC 2 A

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers