LGMOD TV S6 Chipset Firmware 1.06.10 Download

Posted at December 3, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	LGMOD TV S6 Chipset Firmware 1.06.10
Category	Tv Hdtv Projectors
Manufacturer	LGMOD
File Size	1.3 MB
Supported OS	OS Independent

LGMOD TV S6 Chipset Firmware 1.06.10 Description

LGMOD is a modded rootfs for LG TVs models based on MStar Saturn 6 and 7 chipsets.

Fixes:

- Devicom DM9601 new devices support added
- LG_DTV folder listing in WebUI->Tools tab

Supported TV models:

- LGMOD is compatible with all MStar Saturn 6 and Saturn 7 based models ('At the moment EUROPEAN ONLY'): 
'WARNING: TV models which have R letter at the end of the model marking are NOT supported. For example: 50PJ350R - is not supported. R models are Saturn 4 based.' 

Installation:

1. Install for the first time - prepare TV:
- In TV menu "IN START"/"System 1" - set "Debug status" to "EVENT"/"DEBUG" (you can use PC audio out with ir diode from old remote control) 
- In serial terminal (putty) press F9 and press F10 - you will see ":debugMain $" (you need RS232 serial cable)
- In debug, run 'sh' command to start shell. If 'sh' command is missing, then try:call debug_os_shell+0xb0
You will see linux shell prompt: "/mnt/lg/lginit #" (or "/lgsw #").

2. Prepare dedicated USB drive:
- You need one FAT32 partition with min free space ~160 MB - full backup of all 25 TV partitions.
- Extroot archive have programs which does not fit in TV root partition.
- You need second partition with min size ~160 MB (EXT2/EXT3 because FAT/NTFS does not support sym.links).

Note: Installation script does NOT write log file! Save the log from serial terminal program (or setup logging to file).

3. Install/Upgrade LGMOD:
- Copy lgmod_S7_#.sh.zip and lgmod_S7_extroot.tar.gz to USB drive - FAT32 partition
- Attach the USB drive to TV and extract lgmod_S7_#.sh.zip archive:
sh lgmod_S7_#.sh.zip
- If installing LGMOD for first time - create full backup. In TV linux shell run:
sh /mnt/usb1/Drive1/install.sh backup
- Install LGMOD - flash lginit and rootfs partitions. In TV linux shell run:
sh /mnt/usb1/Drive1/install.sh install
- You have to restart TV after install.
- To copy and verify your backup - use TV remote control and safely <eject> USB drive.

4. Upgrade LGMOD:
- Once LGMOD is installed, you can upload files using ftp, scp or webui.
You can run above commands in telnet (recommended) or webui "tools/run".
Note: extroot setup script is interractive - do _not_ run it from webui.
- To force full backup run: install.sh noinfo backup

5. Extroot: format EXT2/EXT3, extract and setup:
- If you like, prepare manually EXT2/EXT3 partition and extract extroot archive to '/extroot'.
- In TV linux shell run: /home/lgmod/extroot.sh /mnt/usb1/Drive1/lgmod_S7_extroot.tar.gz
- Be careful, script will ask you: to format EXT2/EXT3 partition; to delete old extroot directory
- Finally, script will update extroot config file (/mnt/lg/user/lgmod/extroot)
 - You can try it - upload the info file to pastebin.com using wget from extroot:
/home/lgmod/info.sh paste

About TV Firmware:

By upgrading your TV firmware version, you will benefit from improved image quality, fixed various noise issues, enhanced Internet connectivity (if available), boosted stability and usability level, as well as from several other changes.

However, you should first check that this release is compatible with your TV model and that it specifically resolves a problem that you have been encountering or makes changes that you deem useful.

In addition to that, since there are numerous TV models and manufacturers, as well as several methods for updating the software version, we recommend that you refer to the product guide, familiarize yourself with the procedure, and initiate the upgrade only when you have completely understood the steps.

Bear in mind that, in the event of an update failure encountered by trying to apply an improper firmware or if you don’t successfully succeed to install the new software, the TV can suffer serious malfunctions.

Therefore, if you wish to apply this release, click the download button, get the package, and refer to the update guide to upgrade the TV firmware. Also, if you want to stay up to date with latest releases, check with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related LGMOD Drivers