1. Driver
  2. Network Card
  3. Netgear WN511B Driver 6.0

Netgear WN511B Driver 6.0 Download

Posted at April 24, 2024 by PCI-DB Team

Install Driver Automatically
Device NameNetgear WN511B Driver 6.0
CategoryNetwork Card
File Size7.4 MB
Supported OSWindows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP

Netgear WN511B Driver 6.0 Description

Fixes / New Features

- Pass 802.11n draft 2.0 Wi-Fi certification
- Fixed: Can not associate to an access point with special characters in its SSID.
- Fixed: Client unable to connect with WNR854T when operating in mix mode wireless security (WPA+WPA2 mix mode)

Known Issues

- WPA2 security performance is better then WPA. We recommend to use WPA2 security if you enable wireless security.

To Install

- Download using the button below and save the file to a new folder.
- If you have already installed the adapter software then:
- Unplug the adapter from your computer.
- Run the file you just downloaded.
- Select Uninstall > Next.
- Follow the prompts to finish uninstalling the old software.
- Run the setup program.
- Click Yes to the License Agreement.
- Select the area where you will be using the adapter, and click Next.
- Plug the adapter into your computer.
- Click Next to start the "Found New Hardware" wizard.
- Click Finish when the wizard completes.

About Network Adapter Drivers:

When connected, the operating system usually installs a generic driver that helps the computer to recognize the newly attached device.

However, proper software must be applied if you want to make use of all features that the network adapter has available. This task also allows computers to properly recognize all device characteristics such as manufacturer, chipset, technology, and others.

Updating the adapter’s drivers and utilities version might improve overall performance and stability, increase transfer speeds, fix different compatibility problems and several network-related errors, as well as bring various other changes.

To install this release, simply get the package, extract it if necessary, run the setup, and follow the instructions displayed on-screen. When done, don’t forget to perform a system restart and reconnect the network adapter to make sure that all changes take effect properly.

Without further ado, if you intend to apply this version, click the download button and install the package. Moreover, check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers

Netgear DGFV338 Firmware 302-20

Device Type: Firmware File Size: 7.4 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear MP101 Firmware 1.3.5

Device Type: Firmware File Size: 18.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear WG511v2 Driver 3.1

Device Type: Network Card File Size: 20.2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

NETGEAR WNA1100 WiFi Adapter Firmware

Device Type: Network Card File Size: 24.9 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.