Teledyne DALSA PC2-CamLink Driver 1.10.00.0028 Download

Posted at December 22, 2024 by PCI-DB Team

Teledyne DALSA PC2-CamLink Driver 1.10.00.0028 Description

New Features

- Support for Windows Vista and Windows 7
- Support for Sapera Monitor
- Support for DALSA Device Manager
- All provided EXE, SYS, DLL and CXM files are now digitally signed.

Fixes

- GIO Input values are now functional.
- In Linescan mode, external 'frame' trigger event is now generated.
- A software trigger will now generate an External Trigger Event, if enabled.
- Fixed possible crash if a start/stop grab was executed before one frame could be acquired.
- Fix issue with serial port in 7 bits data.
- New FPGA and kernel driver to fix issue with possible flash read/write access failure.
- CORXER_CAP_CYCLE_MODE is now initialized properly.
- Fixed cycling mode issues:
If snapping images, the cycling mode was not taken into consideration for selection of 1st buffer to transfer to.
In Next Empty mode, the driver would not set the buffers to full.
Next Empty with trash was not using the trash buffer.
If cycle mode is Off, buffers will now be flagged as full when an image is acquired into.
When using buffer cycling mode 'Next Empty With Trash', when all the buffers were full except one, this last buffer was acquired into twice before starting to acquire into the trash buffer.
- Fixed issue where thread termination could timeout when closing a Sapera application, causing extra delay before the application would actually be terminated.
- Signed all DLL, CXM, EXE, including the setup.exe
- Fixed possible crashing of Sapera Active X application on exit.
- Fixed possible crashing of Board Update tool if no boards was in the computer.
- Fixed the polarity of the STROBE_I input signal.
- If the snap count is not a multiple of the frames per trigger value, the proper error code will be returned instead of the generic Software Error(3).
- Fixed issue where if one de-installs the driver while a Sapera application is still running, OS would not ask to reboot machine. Driver would stay in an unstable state and possibly cause a BSOD when accessing the Sapera application.
- Software trigger of a virtual frame (linescan image) is now implemented.
- Added support for CORGIO_CAP_INPUT_CONTROL_METHOD_2: Inputs are not readable. On the PC2-CamLink, the single Input can only be used as an interrupt and the input cannot be read. Using the capability can prevent an application from trying to read the input.
- Added support for Sapera Monitor tool.
- If an ACQ Line event causes an overflow of the message queue, this event is disabled automatically if the rate is greater than 1 event/500usec or if the message queue keeps on overflowing to prevent possible freezing of the PC. This situation can easily be done by enabling the ACQ 'End of Line' event by the user's application or through the Sapera Monitor application.
- CORACQ_VAL_EVENT_TYPE_END_OF_LINE is now supported (same as CORACQ_VAL_EVENT_TYPE_END_OF_NLINES with 'n' = 1, which is the only value supported anyway).
- Added support for CORACQ_CAP_SERIAL_PORT, CORACQ_CAP_EXT_LINE_TRIGGER_SOURCE_STR, CORACQ_CAP_EXT_TRIGGER_SOURCE_STR
- Fixed possible computer deadlock when both Serial interrupts and Acquisition interrupts occurred simultaneously.

About WebCam Driver:

Enabling your embedded web camera by installing appropriate software will allow your system to capture and send images through a computer network, and include support for various features that the webcam benefits from.

In addition to that, updating the software on your device can fix various problems that might be encountered during the product’s lifetime, and improve existing features like image quality, or add support for new ones.

When it comes to the installation process, the steps are very simple, as each manufacturer tries to make them as easy as possible, so that every user can perform the update on their own – simply run the package and follow the on-screen instructions for a complete installation.

Therefore, if you consider applying this package, hit the download button, and install it on your computer. Moreover, constantly check with our website in order to make sure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Teledyne DALSA Drivers