Netgear SPH101 Firmware for US 1.0.48.11 (Beta) Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Netgear SPH101 Firmware for US 1.0.48.11 (Beta)
Category	Firmware
Manufacturer	Netgear
File Size	14.5 MB
Supported OS	Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Netgear SPH101 Firmware for US 1.0.48.11 (Beta) Description

NETGEAR has been a worldwide provider of technologically advanced, branded networking products since 1996. Our mission is to be the preferred customer-driven provider of innovative networking solutions for small businesses and homes.

Enhancements / New Features:

1. This new firmware provides the ability to login to T-Mobile hot spots within the continental United States using the Skype WiFi Phone (SPH101).
2. You can not log into any T-Mobile hot spots outside United States.
3. You should have already established an account with T-Mobile to be able to use this feature on SPH101. You cannot create a T-Mobile account using the SPH101.

How to use the T-Mobile features on SPH101?

After you have completed the upgrade procedure described below, follow: Instructions to login/logout of T-Mobile account on your SPH101.

Upgrade Procedure:

NOTE:

* Make sure the power cable is plugged in or the battery is fully charged before continuing with the update process
* After upgrade, the phone loses its auto sign in info if there was one (Skype account is signed out during upgrade.)

This is a 2 stage process ? the first stage will be on the SPH101 and the second stage will be on the PC where you have installed the SPH101 WiFiPhone Update Utility. You must follow and complete both stages to successfully upgrade the firmware on the SPH101.

On SPH101:

1. Select Menu from the main screen
2. Scroll down and select Settings, then select Information, verify the software version is V1.0.35.31 or later. (You must have software version v1.0.35.31 or later before you can upgrade and use the T-Mobile feature)
3. Click Back and select General.
4. Scroll down and select Software Updates.
5. Scroll down and select Update from PC.
6. The phone will then sign you out and reboot into a mode that will accept the firmware.
7. You should see the following screen "Make sure the power cable is plugged in or the battery is fully charged before continuing with the update process".
8. Press OK.
9. Select the wireless network where the computer that will be running the WiFiPhone Update Utility is also connected to and press Next. The SPH101 and the Update PC must be on the same network in order for this firmware update to start.
10. A summary of the wireless network that you have selected will show up with the SSID, MAC address and the type of security.
11. Press Connect. Depending on your wireless settings, the phone may prompt for you to enter the security information such as WEP/WPA key or passphrase.
12. Once you have successfully connected to the wireless network, you will see the ?Successfully connected IP xxx.xxx.xxx.xxx.? You will also see the ?Enter this SPH101 IP address on your WiFiPhone Update PC, Press NEXT when finished.?
13. You now have completed the first process of the upgrade on the SPH101. Please install the WiFiPhone Update Utility on the PC and proceed to the next part of the upgrade process.


For detailed upgrade procedure visit http://kbserver.netgear.com/release_notes/d103076.asp

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Netgear Drivers