Kramer VP-747 Presentation Scaler-Switcher Firmware 1.11 Download

Posted at December 24, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Kramer VP-747 Presentation Scaler-Switcher Firmware 1.11
Category	Firmware
Manufacturer	Kramer
File Size	1.3 MB
Supported OS	OS Independent

Kramer VP-747 Presentation Scaler-Switcher Firmware 1.11 Description

The following changes were made in this version:

Fixes:

- There no audio on the output when Apple devices are connected to input.

VP-747 Firmware Upgrade Procedure

1. Acquire xxx.brit file with the required version of firmware.
2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).
3. Plug the device with the firmware file into one of the USB connectors on the rear panel of the VP-747 and switch on the scaler.
4. Wait until the scaler boots up and verify that the Preview and the Program outputs are set to different inputs. Not necessary to have real signals on the selected inputs.
5. Use OSD menu to navigate to
Utility>Misc Setting>Firmware Download
6. Press ENTER button. If the OSD opens list of files – skip the following step and continue with the step 8 below.
7. If the OSD doesn’t open list of files – press Take button to swap the Preview and the Program inputs. Repeat the steps 5 and 6 above.
8. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.
9. Confirm the upgrade and wait until progress indicator gets to 100%.
10. Remove the device with the firmware file from USB connector and restart the scaler by recycling the power.
11. Plug the device with the same firmware file into second USB connector on the rear panel of the VP-747 and repeat the above procedure.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Kramer Drivers