Kramer VP-747 Presentation Scaler-Switcher Firmware 2.11 Slave Download

Posted at May 2, 2024 by PCI-DB Team

Kramer VP-747 Presentation Scaler-Switcher Firmware 2.11 Slave Description

Slave upgrade procedure

1. Switch VP-747 ON and verify in OSD that the Baud Rate (Utility>Misc Setting>Baud Rate) is set to 115200.
2. Connect the non standard RS232 cable as shown above. (PIN 4 is connected. Pins 2&3 are crossed).
3. Start DTR software.
4. From serial port, select Com port and press the open port button. Make sure the open Com LED turns green.
4. Select “Reset” button and verify communication stays ON.
5. Press “Download” button and select the slave file (FW_VSK…).
The download procedure will be executed automatically. If at the end of the process software shows message “CRC Check …Fail” – ignore the message and continue with the procedure.
6. When process is completed, turn the VP-747 unit OFF and ON.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Kramer Drivers