Kramer VP-729 Presentation Scaler-Switcher Firmware 2.15 Download

Posted at December 26, 2024 by PCI-DB Team

Kramer VP-729 Presentation Scaler-Switcher Firmware 2.15 Description

Audio Firmware ver. 2.15

1. Fixed bug – after switching inputs the audio volume is incorrect.

Firmware ver. 1.15

2. Removed minimum limitation in output custom resolution: now it is possible to create custom resolution down to 1x1.
3. Maximum horizontal size of PIP window is increased to 960 pixels.
4. Fixed bug: if “Lock” command is sent via RS-232, then different input button is pressed on the front panel and then “Unlock” command is sent via RS-232 the unit will switch to the input that was pressed during the Lock state.
5. Default input resolution for Mode 1 (Setup>Advanced Setup>Mode Set) is changed from 1400x1050@60Hz to 1680X1050@60Hz.
6. Fixed bug: if Slideshow is set to OFF after changing input selection from USB and then back to USB the input doesn’t show the selected picture but first picture in the list.
7. If during Freeze mode the output resolution is changed Freeze is canceled to prevent picture distortion.
8. Fixed bug: Power ON/OFF commands (Y 0 91 1/0) are now executed properly.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Kramer Drivers