PCI-DB.com
  1. Driver
  2. Firmware
  3. Kramer VP-460 Presentation Scaler-Switcher Firmware 24832

Kramer VP-460 Presentation Scaler-Switcher Firmware 24832 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically
Device NameKramer VP-460 Presentation Scaler-Switcher Firmware 24832
CategoryFirmware
ManufacturerKramer
File Size770 KB
Supported OSOS Independent

Kramer VP-460 Presentation Scaler-Switcher Firmware 24832 Description

The following changes were made in this version:

Added Features:
- “PiP” command  1360x768p60 output resolution
- Color depth selection to EDID select
- PiP button as shortcut to toggle window control when navigating the OSD MENU
- Y command – Get PiP key function
- Get “win–cust” command
- “No Signal” feature
- “Auto Switching” feature added(“last connected” available only in 461)
- Input EDID – “Single/Multiple modeline” feature “Image Shift Mode” feature “AUD-RESET” audio reset P3K command

Fixes:
- HDCP improved  Support analog mute HW fix on next HW board revision Manufacturer ID changed to KMR in EDID
- Fixed 1280x800@60 EDID select
- OSD Menu control status - changed input resolution in PiP window mode, changed to "Entire System Control"
- Firmware upload via K-Upload fixed
- “Auto sync off ” didn’t work in PiP mode
- 1280x960 @85 and 1280x1024 @85 resolution alignment fixed
- Freeze didn't work properly after Auto Adjustment (VP-460 bug 544)
- OSD changed its correct colors
- VP-461 stopped scanning on DP(Auto Switching)
- VP-461 audio noise from PC input
- Unit doesn’t load its default Native resolution after reset factory setting, but only after switching to PC input
- No audio out when SDI input was at HD or 3G format
- No video out after sending “FACTORY” command by serial channel
- Output resolutions not compatible to standard
- SDI out – no audio after power off and on
- Color problem in PiP window when using PC as input by serial channel
- Input EDID – “Single/Multiple mode line” feature: DP input always set to Multiple mode
- “Analog Take Over” feature is not relevant to PC input – add remark to OSD Audio pops on analog audio out
- Picture was shifted and distorted after changing input resolution
- Analog audio out was interrupted in case of plug in / plug out analog audio in – in spite of “Analog Take over” feature is in OFF state.
- Significant anti-audio loss measures were added to prevent audio loss problems.
- Video – When switching between HDCP and non HDCP sources sometimes there was HDCP snow or no output signal.
- Video – There was image tearing for output resolutions 1080p23.97/24/25/29.97/30.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Kramer Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.