Ubiquiti UVC-Dome IP Camera Firmware 3.2.0 Download

Posted at May 8, 2024 by PCI-DB Team

Ubiquiti UVC-Dome IP Camera Firmware 3.2.0 Description

Change Log:

- Controller: Cloud Login support (SSO)*
- Controller: No more messing with firewall port exceptions!
- Controller: Performance optimizations
- Controller: Added minimum motion trigger time
- Controller: Mobile app latency reduced dramatically
- Controller: Upgraded SSL to fix security vulnerability
- UI: No more Flash!
- UI: Timeline feature added
- UI: Ability to create "Advanced" Live Views to cycle cameras when motion is detected, or on a time interval
- UI: Ethernet and WiFi link state indicators added
- UI: Digital zoom and panning added
- UI: Variable playback speed in Timeline and Recordings
- Firmware: UniFi Video Cameras can now be configured in "Standalone" mode with native RTSP streaming
- Firmware: Image settings can be configured from camera Web UI
- Firmware: Microphone can now be disabled.
- Firmware: Low Resolution now truly 16/9. Resolution changed to 640 x 360 (from 640 x 368)
- Firmware: Medium resolution is still 720x400 (not true 16/9). Due to camera limitations, we are unable to fix this.
- Firmware: Improved image quality in low light
- Firmware: Upgraded SSH and SSL to fix security vulnerabilities
- Firmware: Improved false-positive motion detection
- Firmware: Improved IR sensitivity

Known Issues:

- When inviting other users to access your NVR via the cloud, if they've never registered with Ubiquiti before, they'll need to confirm their account (in a separate email).
- Timeline only works on recordings made with UniFi Video 3.2. It will not show recordings made with 3.1.x.

About Network Camera Firmware Updates:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ubiquiti Drivers