NETGEAR RN102 NAS Firmware 6.5.1 arm Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR RN102 NAS Firmware 6.5.1 arm Description

Enhancements:

- Database verification and recovery during startup.
- Fan speed adjustment on systems with erratic fan readings.
- Shortened the timeout when checking for SMB2 and SMB3 support when starting a SMB backup job.

Bug Fixes:

- Occasional crash during shutdown when setting WoL. (RN202/RN204/RN212/RN214).
- Switching to the wrong UID mapping scheme on upgrade in ADS mode.
- File duplication failure on AFP when logged in using the same username and UID from OS X.
- NFS snapshot access when using a configured host list.
- Possible missed snapshots under some circumstances.
- SMB backup job failure when the username contains a space

WARNINGS:

- Devices updated with 6.5.1 firmware cannot be downgraded to versions of the firmware earlier than 6.5.0.
- ReadyNAS 102, 104, and 2120 must not be updated directly from 6.3.0 - 6.3.4 to 6.5.0. They must first be updated to either 6.2.x or 6.3.5.

How to update firmware on ReadyNAS OS 6 storage systems:

- Download the latest firmware for your system.
- Connect the USB drive containing the updated firmware file to your ReadyNAS system.
- On the local admin page, select System > Settings > Update.
- Click the Install Firmware button.
- The Update Firmware pop-up screen displays
- Click the Browse button.
- In the pop-up file browser that displays, navigate to the file containing the updated firmware and select it.
- The Update Firmware pop-up screen displays the name of the selected file in the File Name field.
- Click the Upload button.
- The firmware file uploads to your ReadyNAS system. After a few moments, the Update Firmware pop-up screen displays details about the new firmware.
- Click the Install button.
- You are prompted to reboot your ReadyNAS system to complete the firmware installation.
- Reboot your ReadyNAS system.
- If you enabled email alerts, your ReadyNAS system sends a message when the firmware update finishes.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Netgear Drivers