NETGEAR DG834Nv1 Router Firmware 1.02.15 Download

Posted at April 29, 2024 by PCI-DB Team

NETGEAR DG834Nv1 Router Firmware 1.02.15 Description

New Features & Bug Fixes:

- The manual has been updated and is accessible by clicking on the Web Support Documentation link when the Router is on-line.
- Added support for configuring up to four SSIDs (SSID is the Wireless Network Name). To configure multiple SSIDs go the Wireless Settings page. The Region, Channel, and Mode set with the first SSID apply to all SSIDs.
- Added support for Automatic Daylight Savings time. To enable Auto DST check Enable Automatic Daylight Savings Time Adjustment on the Schedule page.
- Added a feature to allow the Access Point (AP) to be enabled and disabled by Schedule. This feature can be configured on the Wireless Settings page.
- Added a feature to allow Remote Management from a list of up to ten discrete IP addresses (but just one at a time). This feature can be configured on the Remote Management page under Advanced, click on IP Address List.
- Fixed a problem where email that had been received from the router had a date exactly one month in the future.
- Fixed a problem where the wireless N speed was always displayed as "Up to 130Mbps" when the channel was set to "Auto".

To Upgrade:

- If you've changed any values from the defaults, write them down. Then if you ever need to do a factory reset, if there are problems upgrading, you'll have all the information necessary to reconfigure the device.
- Download using the button below, saving to a convenient place such as your desktop.
- Using a Web browser, login to the router as admin
- Under Maintenance click Router Upgrade
- Click Browse and find the upgrade file that you just downloaded.
- Click Upload
- Wait for the upgrade progress bar to complete and final prompt to appear.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers