Ubiquiti EdgeRouter ER-X Router Firmware 1.10.5 Download

Posted at November 2, 2024 by PCI-DB Team

Ubiquiti EdgeRouter ER-X Router Firmware 1.10.5 Description

Fixes:

- POE: Keep POE status during reset for ER-X-SFP/EP-R6/EP-R8/ER-12 devices
- DHCP: Fixed DHCPv6 failure with VIF-0 interface
- SSH: Disable weak ARCFOUR ciphers
- SSH: Disable SSH port forwarding for operator user
- Offloading: Added CLI commands to resize flow table on Octeon-based routes
- Interface: Fixed bug when SFP interface link was down after upgrade on ER-X-SFP
- BGP: Fixed bug when commit failed when setting inactive BGP peer
- DNS: Upgraded "ddclient" to support "cloudflare" v4 API
- Interface: Fixed random bug when interface stopped passing traffic after changing speed/duplex
- Interface: Fixed bug when eth0 speed/duplex could not be changed on ER-Infinity
- System: Fixed bug when processes randomly crashed with SIGBUG on ER-X
- System: Fixed bug when PoE status was not reset when doing "factory-reset"
- System: Fixed bug when "ubnt-util" crashes with SIGFPE if smart-queue rate was less than 1kbps
- UNMS: Downgrade "udapi-bridge" to 0.3.13 to fix UNMS freeze issue 

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ubiquiti Drivers