Testo 880 Thermal Imager Firmware 1.22 64-bit Download

Posted at November 21, 2024 by PCI-DB Team

Testo 880 Thermal Imager Firmware 1.22 64-bit Description

Firmware Update instructions:

1. Download
To update the firmware you need an executable file called Flash-Tool. Please download in accordance with your operating system (32 bit or 64 bit) the appropriate Flash-Tool from the Testo Download-Center.
By double-clicking on the downloaded file it will be unzipped.
(Default directory c: \ testoWBK)
2. Preparation of the thermal imager
To upgrade to the latest firmware you need to prepare the thermal imager
for the data transfer.

Procedure:

1) Insert a fully charged battery
2) Connect imager and computer by using the USB - cable
3) Switch on imager
3. Open the folder where you
(Default C:\testoWBK)
4. Please run the programme Flash Tool
5. Once the program has been started click on the Browse button
6. Select the appropriate firmware for your thermal imager and confirm by clicking on the Open button
7. Under Available Devices the serial number of your thermal imager connected will appear.
Beneath “Binary File” the bin-file will be displayed according to your selection made in the previous step.
8. To start the firmware update please confirm by pressing the Flash button.
It takes about a minute to complete the update.
You can see the progress in the status bar.
9. After a successful update the following message appears at your PC
10. The camera will then display the following note
11. As a last step turn the camera off, wait for about three seconds and then turn it back on.
The camera will show the current firmware version during start-up.

Important Notes

- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- Print out these instructions for use as a reference during the installation process.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Testo Drivers