ZyXEL ZYWALL USG 200 Security Gateway Firmware 3.00(AQU.4)C0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ZyXEL ZYWALL USG 200 Security Gateway Firmware 3.00(AQU.4)C0
Category	Firmware
Manufacturer	Zyxel
File Size	51.2 MB
Supported OS	OS Independent

ZyXEL ZYWALL USG 200 Security Gateway Firmware 3.00(AQU.4)C0 Description

Fixes:
- Add UDP session time out setting on GUI, Firewall > Session Control page.
- GUI filter in Firewall (need to match “any” rule when choose “Zone”)
- PPTP throughput enhancement
- Allow static route to configure the default route 0.0.0.0
- Update EPS signature file version 1.0.0.13
- The new EPS signature file adds signatures for the following new firewall and anti-virus software support.
- New Firewall software:
- New Anti-Virus software:
- After upgrade to 3.00 FW, "adjust-mss auto" will append automatic.
- After rebooting,Tunnel Interface/Bridge/Virtual Interface IP can not save to 192.168.200.1
- The user is authenticated via AD server, and the username contains a spaces(eg. Rizhong Cheng). If the user tried to log in SSL VPN, it will be treated as a USG user.
- The Port Statistics Grid View show abnormal graphic
- DDNS-Module shows missing Iface.
- USG 100 App patrol "MSN" use "From" criteria will causing policy inacitve
- Service Object abnormal delete
- USG300 Bug2 l2TP using wrong Port for LDAP authentication
- BWM rule set the outgoing interface to IPSec Tunnel has error.
- Firewall rule doesn't work normally with empty object
- USG-100 3G doesn't disconnect (After fallback to primary WAN, DNS query will still keep on passive WAN)
- USG20. PPPoE is not up.
- Receive mail from webmail site will not show complete subject
- CF URL test failed.
- Probleem met 3.00 firmware
- clients can't use L2TP passthrough to internet after update to 300AQU0ITS-r32927
- [E] USG-200 / L2TP LDAP
- USG-100 IPsec tunnel suddenly cannot be established anymore
- After upload file to device, file_upload-cgi is dead.
- USG 1000 Crash
- [E]USG series not accepting MS Windows ICS DHCP Lease
- Content Filter will pop out error message. "System internal error. Invalid service"
- L2TP can not build after device reboot.
- USG-1000 / L2TP User Auth will fail after 2 Weeks
- USG-300 / ZySH Daemon Issue, VPN can't build up and DSL disconnect Issue since Patch 4 Weekly
- pro daemon dead after SSLVPN-Dial-in fail with FQDN
- After using IPSec/SSL VPN for a long time, the throughput drop and finally no more traffic can be encrypted/decrypted.
- USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue
- Downloading large amount of emails outlook email dump fail
- USG-1000 / 400 L2TP VPN’s after upgrade to v3.00 cause issue
- LAN1 will stop distributing IP once LAN2 is changed to DHCP Relay
- USG1000 - Reboots automatically two times per day.
- L2TP TCP MSS adjustment does not work.
- L2TP Query DNS fail
- L2TP error log USG Send:[HASH][NOTIFY:INVALID_SPI]
- Fax-machine using the SIP protocol does not work.
- Usg1000 - L2TP-clients behind NAT
- If the SIP ALG turn on, from [additional branch] to [branch ] or [branch] to [branch], one-side hearing.
- After device root, Sierra 305 cannot be detected.
- When login as User on USG, get sometimes the message: \"You will be redirected to the login page due idle timeout or network problem.\"
- USG-300 / Crash after 30 Minutes and no Login possible.
- Adding a policy route to allow L2TP to access the internet via USG; however, it will be failed. PPPoE is fine, but PPTP will be failed.
- The monitor of users will show wrong Ips.
- PC remove ZyWALL SecuExtender , PC will crash.
- NAT Traversal reactive when reboot
- SMTP name enlarge from 30 -->60 (USG-50 / System Mail Log)
- TCP port 53 default is on (USG-100 / QNAP Virus)
- IPSec VPN nailed-up Fail
- USG 100 - L2TP Authentication
- System won’t redirect http to https if http server is not listen to port 80.
- Changing SSL VPN config will effect Zone setting.
- ZySH / Quick Sec Crash and all Tunnels disconnect
- [E] USG-1000 / IP-SEC Modul
- USG300 - VPN Issue
- IPSec VPN adjust MSS does not work.
- USG 300 reboots with coredump
- NAT-T will auto enable, after upgrade from 2.20 to 3.00
- [E] USG-100 Site to Site VPN and deactivate Tunnel Issue
- VPNs Unstable
- [E] USG-1000 / Crash again and Certificate Tunnel can't recover
- VLAN interface command saves at wrong CLI group id.
- Connectivity check fail by using TCP when target is not in same subnet with the interface.
- Dynu dynamic dns service not working.
- ZLD 3.0 / NAT-Traversal setting not saved to config file.
- Interface IP cannot modify anymore after using duplicate IP with SSL VPN IP.
- USG-100 L2TP password error after update to 3.0
- Ping with a large size packet through IPSEC VPN tunnel will fail.
- Duplicate domain zone in named.conf causes device fail to bring up named daemon.
- ITS72194: USG-100 L2TP stress test leads to reboot
- Apply ITS#71640 config of ZLD2.20 causes zyshd dead
- After update 3.00 FW, Pre-Share key caused reboot device apply to default configure.
- [Beta] Apply specific config file to device, it will take 40 minutes to finish it.
- DDNS couldn't auto update per 28 days
- BWM LAN to WAN UDP packet couldn't limit
- L2TP and Auth. by ad-users does not work (BETA FORUM)
- Device registration loss and Anti-X disable.
- HTTP throughput is slow with Commtouch content filter
- [E] USG-300 / L2TP Payload Issue
- [E] USG-20W / L2TP cause Daemon crash
- USG-1000 IPSec VPN Probleme Caritas

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers