NETGEAR RN4220X NAS Firmware 6.2.2 x86 Download

Posted at December 22, 2024 by PCI-DB Team

NETGEAR RN4220X NAS Firmware 6.2.2 x86 Description

Enhancements & Bug Fixes:

- Fixed LAN instability in some IPv6-enabled environments.
- Fixed FQDN validation for modifying existing backup jobs.
- Fixed potential dangling external storage lock, which could cause external drives to not mount.
- Fixed issue with expansion not completing.
 

Deployment Notes / Limitations:

- Wake on LAN (WOL) will not be supported on the ReadyNAS 4220 at this time using the 10GbE port. Use the 1GbE port for WOL.
- There is no error message presented in the local admin GUI when the USB key is missing from the system for encrypted volumes. The LCD display will present a message that the USB key is missing.
- If the USB key is missing for encrypted volumes, the user has to wait for a 10 minute timeout. After the timeout, the encrypted volume will appear as inactive in the local admin GUI.
- If a FLEX-RAID volume has be expanded, the volume cannot be switched back to X-RAID mode.
- If you wish to remove a USB storage device, you should first eject the drive in the local admin GUI before removing the USB device from the ReadyNAS to prevent errors on the file system of the USB device.
- ReadyNAS 102, 104, and 2120 only support creating iSCSI LUNs 8TB and smaller.
- ReadyNAS 102, 104, and 2120 only support volumes up to 16TB.
- ReadyNAS devices updated to ReadyNAS 6.2.0 or later cannot be downgraded to ReadyNAS 6.1.x or earlier.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Netgear Drivers