Lorex LNR341 NVR Firmware 2.2.7_build131218 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Lorex LNR341 NVR Firmware 2.2.7_build131218
Category	Network Ip Surveillance Baby Camera
Manufacturer	Lorex
File Size	12.7 MB
Supported OS	OS Independent

Lorex LNR341 NVR Firmware 2.2.7_build131218 Description

This firmware is used for the 4 & 8-channel LNR300 Series NVR (LNR340/LNR380).

The firmware upgrade contains the following system enhancements:
- Fixed issue with email notifications.
- Fixed issue with Daylight Savings Time.

Reboot your NVR before starting the upgrade.

To upgrade firmware from a USB flash drive:

1. Download the firmware upgrade
2. Extract the firmware file and copy the firmware to a blank USB flash drive. 
2.1. Right-click on the .ZIP file and click Extract
2.2. Click Extract to obtain the firmware file (digicap).
2.3. Copy the firmware file (digicap) to your USB flash drive.
3. Insert the USB flash drive in one of the USB ports on the front or rear panel of the NVR.
4. Right-click to open the Quick Menu and select Menu.
5. Enter the system user name (default: admin) and password (default: 000000) and click Yes.
6. Click Maintenance. Then, click Upgrade.
7. Click on the firmware file and click Upgrade.
7.1. Click the firmware file
7.2. Click Upgrade
8. Click Yes to confirm. Wait for the firmware upgrade to complete.

About Network Video Recorder Updates:

Applying a new firmware package on your Network Video Recorder (NVR) should improve overall performance and stability, fix various issues encountered with the device, or add support for newly developed features.

The NVR should be carefully upgraded by a power user (that is to say, someone who has the know-how to successfully complete the process), but it can also be performed by an average user at his or her own risk.

Either way, given the fact that each producer has their own method for installing a new firmware, and that every device has a particular way to enter the update mode, you must not consider upgrading the software until you have read and thoroughly understood the installation steps.

As a rule, said steps shouldn’t pose too much of a challenge because manufacturers strive to make them as easy as possible. As with everything else, exceptions do occur, and users should be prepared for them.

Usually, you should transfer the compatible firmware to the Recorder through a USB cable or a memory card, and afterwards enter update mode from the unit’s setup menu or through a specific power-on method.

With this in mind, if you intend to apply this release, make sure the package is compatible with your Network Video Recorder and that it brings about the changes you want or require; hit the download button and apply the new firmware.

Don’t forget to regularly check with our website so that you don’t miss any updates.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Lorex Drivers