3xLOGIC VSX-2MP-FE IP Camera Firmware Download

Posted at November 23, 2024 by PCI-DB Team

3xLOGIC VSX-2MP-FE IP Camera Firmware Description

Updating Firmware - Camera Web UI Method

To use the Camera Web UI method:
1. Navigate to the camera’s web interface. This can be done by entering the IP of the desired camera into a web browser’s URL field.
2. Login to the Web UI. (Default credentials of VISIX Cameras are User: admin Password: 12345)
3. Select the Configuration tab.
4. Open the Advanced Configuration menu.
5. Select System
6. Select the Maintenance tab.
7. Under the Remote Upgrade section, select Firmware from the drop-down.
8. Select browse. A file explorer will open. Navigate to the firmware file you downloaded in Section 2 of this guide, and select it. Click OK.
9. After selecting the correct firmware file, click Upgrade to begin the firmware update process. Please allow 1-10 minutes for the firmware update process to complete.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related 3xLOGIC Drivers