Steinberg Nuendo SyncStation Firmware E117 Download

Posted at December 22, 2024 by PCI-DB Team

Steinberg Nuendo SyncStation Firmware E117 Description

Updating the SyncStation firmware:

There may be situations where you have to perform a firmware upload for the SyncStation, e.g. when a firmware update is available, or when the SyncStation does not boot correctly.

Caution: Make sure that Nuendo is not running when you use the upload application, because this would result in failure of the upload and corrupted firmware.

To update the firmware, proceed as follows:

1. Go and download the most recent version of the SyncStation firmware to your computer.
2. Copy the “SyncStationFirmwareUploader” file to your computer, and double-click it. The file can be found on your Nuendo DVD or on the Steinberg web site mentioned above.
3. On the “MIDI Input” and “MIDI Output” pop-up menus, select SyncStation.
4. Click the “Verify SyncStation” button.
5. Click the Browse button to locate the firmware file (extension “.chf”) on your computer.
6. Select the CHF file, and click Open.
7. Make sure that the hardware and software versions displayed in the upper and in the lower sections of the dialog are identical, and click “Upload Firmware”.
8. Perform a factory reset of the SyncStation: On the SyncStation menu, open “Unit 07 – Install Template”, select “>Factory”, and confirm by pressing and holding the cursor down button.
9. Switch off the SyncStation, wait for four seconds, and restart it.

When the SyncStation does not boot correctly, you can boot it in a restricted mode in order to perform a firmware upload. Proceed as follows:
1. Keep the cursor down button of the SyncStation pressed, and switch it on.
2. The SyncStation displays the message “Load Firmware”.
3. Double-click the “SyncStationFirmwareUploader” file (see above).
4. On Windows 7/Vista and Mac OS X systems, select CB core on the “MIDI Input” and “MIDI Output” pop-up menus. On Windows XP systems, select “USB Audio Device”.
When performing a firmware upload in restricted mode, the “Verify SyncStation” function cannot be used.
5. Click the Browse button to locate the firmware file (extension “.chf”) on your computer.
6. Select the CHF file, and click Open.
7. Click “Upload Firmware”.
8. Perform a factory reset of the SyncStation: On the SyncStation menu, open “Unit 07 – Install Template”, select “>Factory”, and confirm by pressing and holding the cursor down button.
9. Switch off the SyncStation, wait for four seconds, and restart it.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Steinberg Drivers