Reloop Contour Controller Edition Firmware 11 Download

Posted at December 3, 2024 by PCI-DB Team

Reloop Contour Controller Edition Firmware 11 Description

Firmware Update procedure:

How to update the firmware of your Reloop Contour controller:
[When upgrading or downgrading the firmware of your Reloop Contour, some important points have to be observed.]
Don't forget to close all other applications before!
1. Start Update mode of your Reloop Contour.
[It's very important that your Reloop device is connected correctly to your computer.]
2. Now power OFF the Reloop device if not already done.
3. Press and Hold the “CUE” button at the bottom and power it ON.
[The CUE button should light up. You can release the CUE button.]
4. Start Update Application
[Start the attached Java application “UsbUpgDataApp_V*.jar”.]
5. Select your Reloop Contour
[Just open the window “Select Midi Device“ and find the entry “Reloop Contour”.]
6. Firmware Update
6.1) Choose the correct firmware for your Reloop Contour in the download pool.
Be sure that it is the correct firmware, otherwise it might damage your device.
6.2) Press “Start” to start updating your Reloop device.
7. Finish
[When the update was successful, you should see the following message: “Update Success!!!”]

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Reloop Drivers