NETGEAR FSM7352S Switch Firmware 7.2.1.6 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	NETGEAR FSM7352S Switch Firmware 7.2.1.6
Category	Firmware
Manufacturer	NETGEAR
File Size	8.3 MB
Supported OS	OS Independent

NETGEAR FSM7352S Switch Firmware 7.2.1.6 Description

Fixes:
- If configuration steps contain command lines to set the same PVID for a port multiple times, the configuration file may not be saved when the save command is issued.
- On FSM7328S or FSM7352S where OSPF protocol is not supported but the configuration may show OSPF is enabled and can not be disabled from the CLI or GUI.
- Traffic destine to a VRRP virtual MAC address will stop being forwarded after the VRRP master is rebooted. No response on console and from GUI while modify MSTP port path cost thru GUI
- The switch would fail in using xmodem protocol to download file to the switch by serial port
- GUI MSTP: VLAN 24 can not be associated with MST instance.
- FSM73xxPS: POE load power consumption shows zero although POE is proving power
- OSPF GUI configuration page is missing “external-lsdb-limit” field
- HTTP firmware download failed while using GUI with HTTPS mode
- FSM7328S: DHCP server configuration web GUI page shows bad client id in manual mode
- FSM73xxS: Sometime firmware upgrade may failed due to old configuration can not be supported on newer version
- FSM7328S: the web GUI is showing unsupported features like OSPF and VRRP

New Features/Enhancements:

- Extend IP ACL rule configuration for including TCP flag field as filtering criteria
- Add Protected Ports Feature

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers