TP-Link MR3020 WiFiCloudNet Firmware Download

Posted at December 18, 2024 by PCI-DB Team

TP-Link MR3020 WiFiCloudNet Firmware Description

Features:

- Powerful Cloud Managed System
- No On-site Wireless LAN Controller required
- Enables Wireless Mesh to Multi Vendor’s Access Point
- Two SSIDs, Public and Private SSID
- Captive Portal with Bandwidth Control System and Voucher
- Custom Splash Page support to Market your own Brands
- Radius Support
- Safe and Secure
- Protect your SSIDs with WPA Keys, AP Isolation and LAN block Feature which prevents user to see each others
- Auto Outage Alerts based on Network
- Real time Network Statistics for individual devices
- Over-the-Air Firmware upgrade
- Custom Script features

How to Flash WiFiCloudNet Firmware

- check if the TP-Link responds on 192.168.0.254
NOTE: your host must have an IP address in the 192.168.0.X/24 range
Open the browser and go to the address:
http://192.168.0.254
Use the following credentials:
username=admin
password=admin
- go to the section Firmware Upgrade and insert the WiFiCloudNet.com firmware 
Note: The default username and password for SSH access on a device running
WifiCloudNet firmware are:
username: root
password: wY5m#C0n8

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related WiFiCloudNet Drivers